Specifications

MSD Software Manual PRELIMINARY Release B Factory Presets.
B.1.10 MSD600M Preset #10 – 'Lt Rt' Pseudo-Surround Sound.
Applies to : MSD600M, MSD600M++, PT0600M, PT0660M, PT0660M-LS
Description: In the 'Lt Rt' preset the Jelly-Fish™ monitors a stereo signal
applied to the first analogue input module. The Phasemeter monitors the PPM
Channel 1 and 2.
The Jelly-Fish™ is configured using rows 55 to 62. In order to show the
surround sound information, this setup uses five vectors in the Jelly-Fish™.
The vectors in the Jelly-Fish™ are assigned clockwise in the order C, Rt, S, S,
Lt. Please note that C and S are derived from the sum and difference of the Lt
and Rt.
If analogue sources has to be monitored, use factory preset #6 where the
sources for the destinations #65 to #66 are changed.
If the MSD is fitted with a '2 Channel Analogue Input Module' then the preset is
configured as the following table shows.
PRELIMINARY Release Page 63 of 64
Preset #10 – Lt Rt
Destination
Number.
Destination
Name.
Source
Number.
Source
Name.
Phase
53 PHAS 57 CH 1
54 PHAS 58 CH 2
Jelly-Fish™
55 CENT 59 CH 3
56 C + 1 58 CH 2
57 C + 2 60 CH 4
58 C + 3 60 CH 4
59 C + 4 57 CH 1
60 C + 5 51 OFF
61 C + 6 51 OFF
62 C + 7 51 OFF
Peak Programme Meter
65 CH 1 33 Lt
66 CH 2 34 Rt
67 CH 3 55 C
68 CH 4 56 S
69 CH 5 51 OFF
70 CH 6 51 OFF
71 CH 7 51 OFF
72 CH 8 51 OFF
Destinations 1 to 48 and 73 to 96 are set to OFF (#51).