Installation guide

1150-065-B-05-07
8 installation guide
hardware installation/rail
2
1
Attach and secure the rail to the operator assembly
using the appropriate hardware.
Chain and sprocket must be centered
between the rail assembly.
Cut the wire tie and route the chain around the sprocket
and attach the chain to the other end using the double
master link.
MASTER LINK
CHAIN
3
Locate the chain adjustment bolts on the rail as-
sembly and make the necessary adjustments.
Do not over-tighten the chain.
Make chain adjustments equally on both sides
of the rail assembly.
CHAIN ADJUST