User`s manual

Optical Fiber Amplifier User’s Manual
Rev.1.2 1U-Shelf Series November 2007
5 INTERFACE
5.1 Command Line Interface (CLI)
User can monitor or control EDFA through Ethernet port or COM port.
ADMIN and USER accounts are established separately for different access priorities.
ADMIN account holder can set passwords for both ADMIN and USER accounts. In
addition, the task of administrative work, such as network connection, monitor and control
of EDFA are to be performed under ADMIN account.
USER account holder, usually equipment operator, is allowed to monitor EDFA’s current
status.
5.1.1 Commands
Information on how to set arguments of each Command is provided after a Command
followed by Enter key.
? : Show available Commands in CLI with description for user’s reference.
ver: Display basic hardware information on EDFA.
cls: Clear the console screen.
ping: Check connection of equipment to which an IP address is assigned.
logout : Log out from ADMIN or USER account. Not available for Telnet connection.
ip: IP address. Key information for Telnet, SNMP, or TCP/IP connection.
subnetmask: Subnetmask address. Key information for Telnet, SNMP, or TCP/IP
connection.
gateway: Gateway address. Key information for Telnet, SNMP, or TCP/IP connection.
initsys:
reset: Reset to factory default setup. Reset the network connection due to network
reconfiguration or any other network connection problems. Operation of optical amplifier
is not affected by this command.
mpu : Main Process Unit configuration as well as setup view and confirmation.
ofau : OFAU (Optical Fiber Amplifier Unit, amplifier module in side shelf-type EDFA or
amplifier module card for rack-type EDFA) configuration as well as setup view and
confirmation.
snmp : SNMP configuration as well as setup view and confirmation.
log : Check log information and eliminate log. Log information can only be eliminated
through console.
timesync : Manually update RTC (Real Time Clock).
Command Execution Privilege
command ADMIN USER
ver O O
cls O O
21