User`s manual

Optical Fiber Amplifier User’s Manual
Rev.1.2 1U-Shelf Series November 2007
ofauEdfaStatusOutPwr 3.1.1.7 Integer32 RO
ofauEdfaStatusReflOutPwr 3.1.1.8 Integer32 RO
- ofauEdfaStatusEntry : List of OFAU status information.
- ofauEdfaStatusUnitOpt : OFAU Reflected Output Power enable/disable.
ofauEdfaStatusUnitOpt Value Reflected Output Power
0 Disable
1 Enable
- ofauEdfaStatusAlarmStatus : OFAU alarm information.
Bit Description
0 P5V Low
1 P5V High
2 Case Temperature
3 Input Power
4 Output Power
5 Reflected Output Power (Option 1)
- ofauEdfaStatusOperMode : OFAU Operation Mode.
Operation
Mode
Value Description
APC 30 Automatic constant power control mode.
ALS 40 Automatic laser shutdown by user.
APC ALS 43 Automatic laser shutdown by APC alarm.
AGC ALS 42 Automatic laser shutdown by AGC (Automatic Gain
Control) alarm.
Key ALS 44 Automatic laser shutdown by key switch
AGC 20 Automatic constant gain control mode.
- ofauEdfaStatusCaseTemp : OFAU Case Temperature, in unit of °C.
- ofauEdfaStatusVcc : OFAU Vcc, in unit of 0.1 V.
- ofauEdfaStatusInPwr : OFAU Input Power, in unit of 0.1 dBm.
- ofauEdfaStatusOutPwr : OFAU Output Power, in unit of 0.1 dBm.
- ofauEdfaStatusReflOutPwr: OFAU Reflect Output Power, in unit of 0.1dBm. Subject to
ofauEdfaStatusUnitOpt setup.
5.2.5.4 ofauLaserStateTable
- ofauLaserStateTable : Table for OFAU Laser (or Pump LDs) management.
Name OID Type Access Note
ofauLaserStateTable 3.2
SEQUENCE OF
OfauLaserStateEntry
ofauLaserStateEntry 3.2.1 OfauLaserStateEntry
ofauLaserStateLDIndex 3.2.1.1 Integer32 RO
ofauLaserStateLDBias 3.2.1.2 Integer32 RO
ofauLaserStateLDTemp 3.2.1.3 Integer32 RO
32