User manual DLE61

2
Parts List
(1) DLE-61 Gas Engine with DLE Carburetor
(1) CM6 Spark Plug with Ignition Wire Spring
(1) Muffl er w/Gasket
(2) 5x20mm SHCS (muffl er mounting)
(1) Electronic Ignition Module w/ Additional Tachometer Lead
(4) 68mm Engine Mounting Standoffs
(8) 5x20mm SHCS with 5mm washers (engine mounting)
(4) 5x40mm SHCS with 5mm Lock Washers & Flat Washers (propeller mounting)
(1) Silicone Pick-up Wire Cover / Ignition Wire Cover
(1) Red Three Pin Connector Lead w/ Pig Tail (for ignition switch)
(2) Three Pin Connector Securing Clips
(1) DLE Decal
Safety Tips and Warnings
This engine is not a toy. Please place your safety and the
safety of others paramount while operating. DLE will not be
held responsible for any safety issues or accidents involving
this engine.
Operate the engine in a properly ventilated area.
Before starting the engine, please make sure all components
including the propeller and the engine mount are secure and tight. It
is strongly recommended that a screw sealant is used (Great Planes
®
Threadlocker GPMR6060) during engine installation.
During the break-in period, it is recommended that the engine be
installed on the aircraft or a test stand with an appropriate shock
absorber. Otherwise it is probable that vibration could rebound