Owner's manual

Parts List

(1) DLE-30cc Gas Engine with DLE carburetor

(1) CM6 Spark plug with spare ignition wire spring

(1) Mufﬂ er w/gasket

(2) 5x20mm SHCS (mufﬂ er mounting)

(1) Electronic Ignition Module w/ additional tachometer lead

(4) 30mm Engine Mounting Standoffs

(4) 4x30mm SHCS with 4mm lock washers & ﬂ at washers (propeller mounting)

(4) 5x25mm SHCS with 5mm ﬂ at washers (mounting engine to standoffs)

(1) Silicone Pick-up Wire Cover / Ignition Wire Cover

(1) Red Three Pin Connector Lead w/ Pig Tail (ignition switch)

(1) Long Heavy Duty Throttle Control Arm

(2) Three Pin Connector Securing Clips

(1) DLE Decal Set

Safety Tips and Warnings

●

This engine is not a toy. Please place your safety and the safety

of others paramount while operating. DLE will not be held

responsible for any safety issues or accidents involving this engine.

●

Operate the engine in a properly ventilated area.

●

Before starting the engine, please make sure all components

including the propeller and the engine mount are secure and

tight. It is strongly recommended that a screw sealant is used

(Great Planes Threadlocker GPMR6060) during engine installation.

●

During the break-in period, it is recommended that the engine be

installed on the aircraft or a test stand with an appropriate shock

absorber. Otherwise it is probable that vibration could rebound