Assembly Instructions
Poweramp • W194 N11481 McCormick Drive • Germantown, WI 53022
800.643.5424 • fax: 262.255.4199 • www.poweramp.com
VEHICLE RESTRAINT
SITE SURVEY
INSTRUCTIONS
1. Survey must be completed based upon conditions at time of installation.
2. Dock face must be clear of any obstructions prior to installation.
3. Lights and signs must be mounted in full view of forklift and tractor-trailer operations.
4. Examples of why bracketing may be required:
• Sloped approach greater than 1/2” per foot.
• Bumper projection over 4.5”. (Bumpers are manufactured to nominal sizes; actual projection must
be veried).
• Insucient embedded lower front pit curb angle
• 24” deep pits.
• Other than solid concrete dock face (6” thick minimum).
5. Hollow “D” and ex steel bumpers not acceptable.
Rev. 11-2018