User manual

10 | DLO TRANSPOD USER MANUAL
Features & Settings
Setting Preset Stations
To set your own preset stations follow these simple steps:
1. Tune the TransPod to the station you’d like to set a Preset for.
2. Press and hold the preset button on the right side of the TransPod for a
few seconds. The display on the TransPod will flash the preset channel you
just set, e.g., CHO1 to confirm your setting.
3. To add a second preset, cycle to another preset number by pressing the
preset button and repeat step 2.
N
N
O
O
T
T
E
E
:
:
Your new preset will override whatever preset was last saved on for
that channel.
4. Repeat steps 1 and 2 for all available Preset channels (up to four).
Controlling the LCD Backlight
The TransPod features a beautiful Indigo Blue backlit LCD display. Its backlight
comes on automatically when you power up the TransPod and any time you
change frequencies. It then automatically turns off after 2 minutes.
You can also manually operate the backlight by pressing the Backlight button
on the left of the TransPod. If it is already on, pressing the button will immedi-
ately turn it off. If the backlight is off, pressing the button will turn the back-
light on indefinitely. To turn it off simply press the Backlight button again.