User manual

ASURO - 4
-
6. Trouble shooting 28
6.1. Failure of RS232-IR-Transceiver ! 28
6.1.1. Activated key and displayed symbol do not match
28
6.1.2. The Terminal-Programm does not display any symbol
28
6.1.3. Still not working 28
6.2. USB-Infrared-Tranceiver does not work
28
6.3. Back-LEDs (D15,D16) glimmen nach dem Einschalten nicht! 28
6.3.1. Back-LEDs do not glow at start up 29
6.3.2. Only one of the back LEDs is glowing 29
6.3.3. Status-LED (D12) is not activated biocolored after start up 29
6.4. A display does not work 29
6.4.1. Status-LED D12 does not work 29
6.4.2. Front-LED D11 does not work
29
6.4.3. Left Back-LED D15 does not work 30
6.4.4. Rigth Back-LED D16 does not work 30
6.5. Linentracer (T9, T10) does not work 30
6.6. A switch does not work 30
6.6.1. Obviously a combination of switches has been activated 31
6.6.2. Display reacts if switches have been interchanged 31
6.6.3. Things still do not work well 31
6.7. The re ected light-sensor (odometer) does not work 31
6.7.1. None of the re ected light-sensors work 31
6.7.2. The left re ected light-sensors does not work 31
6.7.3. The left re ected light-sensors does not work 31
6.8. One motor does not move 32
6.8.1. Both motors do not move 32
6.8.2. Left motor does not move or only in one direction 32
6.8.3. Right motordoes not move or only in one direction 32
6.8.4. One motor rotates in reversed direction 32
6.9. IR-interface 32
6.9.1. ASURO does not send symbols
32
6.9.2. ASURO does not receive symbols 32
6.9.3. Things still do not work well 33
7. Final adjustments 34