User manual Citroën / Fiat / Peugeot
DLS Sweden l info@dls.se l www.dls.
DLS CRUISE CRPP-1.6 Content Welcome to DLS! Thank you for buying a DLS Cruise CRPP-1.6. For us, it’s all about the sound experience. We care deeply about sound and construction quality. In order for your experience to be as optimal as possible, it is important that you fully read this manual, preferably before you start your installation. Keep the manual in a safe and accessible place for future reference. Your speakers must be installed correctly in order to work as intended.
Included products: 2pcs Woofer 2pcs Tweeter 2pcs Crossover Included in box: 2pcs Woofer 2pcs Tweeter 2pcs Crossover 2pcs Included bottom adapter 2pcs Flat-bottom adapter 2pcs Woofer connection line (for loose ends) 2pcs Tweeter connection line (for loose ends) 4pcs Adhesive foam with NC function 8pcs Terminal crimp connectors 4pcs Foam for wrapping 4pcs Screw 2pcs Adhesive for tweeter inclined adapter 8pcs Blind rivet 1pcs Rivet Tool 1pcs Manual Installation Tools that are needed • Phillips screwdriver •
Mounting the drivers Unscrew the old tweeter from the bracket and un-plug the jack. Remove the OEM tweeter from the bracket and replace it with the DLS tweeter. The flat bottom adapter can also be used for the assembly. Use the four-leaf clover foam to secure the tweeter on the back of the A-pillar. For some models, the four-leaf clover needs to be adapted. Use a sharp scissor to modify it. Place the new DLS Cruise driver in the hole for the original speaker. Use the OEM screws to safely mount the driver.
Finally Start assembling the covers again to finish the work. Make sure that no screws or clips are left over, Reconnect the battery/power source terminal. Finally, it´s time to play some good music and enjoy! Running-in time Allow the component kit to play for at least 15-20 hours in order to perform at its possibly best. This run-in can be made with tone sweep or with just music. Start at a moderate volume and increase the volume step by step during the running in period.
Specifications Art. no Woofer Tweeter RMS Power MAX Power Impedance Sensitivity Freq. range Crossover Attenuation CK-CRPP-1.6 6.5” /165 mm with glass fiber cone 1” / 25 mm silk dome tweeter with accessories 100 W 200W 4 Ohm 90dB 1W/1M 60Hz-25kHz 4.8kHz 12dB/Oct with Mundorf caps Tweeter -4db/0db DLS DRIVE CRPP-1.6 Tweeter Technical Specification: Size 1” /2.
R86 Ø6.
DLS Cruise CRPP-1.6 compatible car models Car Fiat Fiat Fiat Fiat Fiat Fiat Model Ducato Grande Punto 500 Panda Punto Tipo Year 2006 – 2020 2005-2018 20072012 – 2020 2009 – 2018 2016 – 2020 Front kit CRPP-1.6 CRPP-1.6 CRPP-1.6 CRPP-1.6 CRPP-1.6 CRPP-1.6 Ford Ka 2009 – 2016 CRPP-1.6 Citroën Citroen Jumper Relay 2006 – 2021 2006- CRPP-1.6 CRPP-1.6 Dacia Dacia Dacia Dokker Lodgy Sandero 2012 – 2018 2012 – 2018 2012 – 2018 CRPP-1.6 CRPP-1.6 CRPP-1.
Product markings The crossed-out wheelie bin symbol means that the product, literature and packaging included must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.
DLS Sweden l info@dls.se l www.dls.
