User Manual

Disconnect all cables for lightning, speaker cable
harness and any other connections.
3
There are several electric and mechanical
connectors on the backside of the door panel.
Release the door lock cable.
Just drill enough to remove the top of the rivets.
Remember to disconnect the speaker harness
before unmounting the speaker.
Be careful when removing the door panels and
lids. Use PRY tools.
Depending on car model, the amount of screws
and placement can vary. In most cases the
screws used are Torx T25.
Some newer models, don’t have plastic clips to
hold the door in place. Just remove the screws
and gently press the door panel up. Be careful
with the door lock knob. Just move the panel
straight up.
The door speakers are either fixed with rivets or
screws. Make sure you have correct tools for
each operation.
RIVETS
Use a 4mm drill to remove the rivets. Make sure
all remains from the old rivets are removed from
the inside of the door.
Remove door speaker