System information

Program 15 : Extension, Basic Setup
15-02 : Multi-Line Terminal Basic Setup
UX5000 Software Program Manual Programming ◆ 229
04 Abbreviated Dialing DIAL Key
Control
Use this option to control the function
of the extension’s DIAL key when
used with Abbreviated Dialing. The
DIAL key can access either the Com-
mon or Group Abbreviated Dialing
numbers.
0 = Common and Individual
Abbreviated Dialing
1 = Group Abbreviated Dialing
0
05 Transfer Key Operation Mode
Use this option to set the operating
mode of the extension’s CONF key.
The keys can be for Call Transfer,
Serial Calling or Flash. When select-
ing the Flash option (selection 2), refer
also to Program 81-01-14.
0 = Transfer
1 = Series call
2 = Flash
0
06 Hold Key Operating Mode
Use this option to set the function of
the keyset Hold key. The Hold key can
activate normal Hold, Exclusive Hold
or Park.
0 = Normal Hold
1 = Exclusive Hold
2 = Park
0
07 Automatic Hold for CO Lines
Determine whether an extension will
use Automatic Hold for CO calls or if
the call should disconnect.
0 = Enable (Hold)
1 = Disable (Disconnect)
1
08 Automatic Handsfree
Use this option to set whether pressing
a key accesses a One-Touch Key or if
it pre-selects the key.
0 = Pre-select
1 = One-touch (Automatic Handsfree)
1 20-09-02
09 Ringing Line Preference for Inter-
com Calls
Use this option to select between Idle
and Ringing Line Preference for Inter-
com calls.
0 = Idle (off)
1 = Ringing (on)
1
10 Ringing Line Preference for Trunk
Calls
Use this option to select between Idle
and Ringing Line Preference for trunk
calls.
0 = Idle (off)
1 = Ringing (on)
1
11 Callback Automatic Answer
Use this option to enable or disable
automatic answer for Callbacks. If
enabled, extension automatically
answers Callback ring when user lifts
the handset. If disabled, use must press
line appearance key to answer Call-
back.
0 = off
1 = on
1
Item
No.
Item Input Data Default
Related
Program