System information

Program 90 : Maintenance Program
90-02 : Setting the Programming Password
916 ◆ Programming UX5000 Software Program Manual
90-02 : Setting the Programming Password
Description
Use Program 90-02 : Setting the Programming Password to set the UX5000 passwords. For
password entry purposes, the UX5000 allows 8 users to be defined. Each user can have a:
● Unique alphanumeric name (up to 10 alphanumeric characters long.
● Password entry of up to 8 digits (using 0-9, # and *)
● Password level
The “IN” level password is used by the “System Installer” for UX5000 programming purposes. The
“SA” or “SB” level password cannot access the “IN” level programs. The reverse type (white on
black) just beneath the Description heading is the program’s access level. You can only use the pro-
gram if your access level meets or exceeds the level the program requires. (“SA” level password
can access to “SA” or “SB” programs, and “SB” level password can access to “SB” programs only.)
Use UA level password allows all of the user-programmable options to be changed when accessing
the UX5000 using the UserPro feature.
!! Caution !!
It is NOT recommended to change this data unnecessarily. If the digits are changed and then forgot-
ten, there may be no normal way to enter the program mode again.
Input Data
Level:
Feature Availability
IN • Available.
User Number 1-8
Item No. Item Input Data
01 User Name Max. 10 characters
02 Password Up to 8 digits
03 User Level 0 = Prohibited user
1 = MF (Manufacturer level)
2 = IN (Installer level)
3 = SA (System administrator level 1)
4 = SB (System administrator level 2)
5 = UA (UserPro UA level)