System information

Program 90 : Maintenance Program
90-07 : Extension Control
UX5000 Software Program Manual Programming ◆ 925
90-07 : Extension Control
Description
Use Program 90-07 : Extension Control is used for the extension maintenance.
Input Data
Conditions
This program is only available in terminal and WebPro programming.
Feature Cross Reference
None
Terminal Programming Instructions
To enter data for Program 90-07 (Extension Control):
1. Enter the programming mode.
2. 90 07
3. Enter the number of the item you want to program.
4. Enter the Menu number to be defined or press FLASH to use the displayed entry.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
Level:
Feature Availability
SA • Available.
Menu Number 1 = Hardware Reset
2 = Software Reset
Item No. Item Input Data
01 Extension Control Extension Number (up to 8 digits)
90-07-01 Menu 1
Ext number
back
↑ ↓ select
90-07-nn Menu n
nnnnn
← − + →