User`s manual

eBOX-III 14
2. Go to “Auto Configuration with Optimal Settings” using the “Sel” keys <↑↓>, then
press <Enter>. A message dialog appears as seen below, hit “ Y ” key and press
<Enter> to save and recover the factory setting.
“Load high default settings (Y/N)? N
”
C. “Operating System Not Found” –
A message indicating that “Operating system not found” appear when my
computer starts (Windows won’t start)
Enter your BIOS setup main menu by pressing <DEL> key, be sure that your C:
drive is enable.
If Windows still does not start, follow these steps to initialize the BIOS:
1. Turn off the computer.
2. Remove any peripheral devices connected to the computer.
3. Restart the computer..
4. Press <DEL> to enter BIOS Setup main menu window.
5. Follow the steps as written in item B. BIOS error message.
For eBOX-III : If you have just connect your computer to a CDR or Floppy disk,
remove these peripherals.. And restart your computer to confirm that the
Windows operating system starts properly. If your computer continues to display
the message ”Operating system not found,” and Windows does not start, please
contact your nearest dealer for servicing.