User's Manual

39
Recording Mode Settings
38
Voice REC Settings
2
Push the jog key up or down to select AGC
ON/OFF.
3
Push the jog key up or down to set the
sampling level and push it to the left or
right to set the level. Then press the jog key to
complete your settings.
1
Push up or down to select Voice REC and
press or push the jog key to the right.
To avoid noise during a voice recording, set the AGC and the sampling / bit rate to optimize
the sound quality of the recording.
Note
● The lower the sampling or the bit rate is, the less the quality of the sound and the smaller the
file size is; the higher the rate is, the better the quality but the bigger the file size becomes.
Line-In REC Settings
2
Push the jog key up or down to select Stereo/Mono.
3
Push the jog key up or down to set the sampling
level and push it to the left or right to set the
level. Then press the jog key to complete your settings.
1
Push up or down to select Line-In REC and
press or push the jog key to the right.
You can select either stereo or mono and set the sampling / bit rate to optimize the
sound quality of the recording.
FM REC Setting
2
Push the jog key up or down to select Stereo/Mono.
3
Push the jog key up or down to set the sampling
level and push it to the left or right to set the
level. Then press the jog key to confirm your settings.
1
Push up or down to select FM REC and press
or push the jog key to the right.
For FM recording, you can select either stereo or mono and set the sampling / bit rate
to optimize the sound quality for the recording.
Document1 10/13/04 4:16 PM Page 38