User's Manual

41
Recording Mode Settings
40
VAD (Volume Audio Detect) Settings
2
Use the jog key to set the level and time.
- You can set the level from 1 to 10 where the higher the
number is, the stronger the sound quality is. You can set the
time from between 1 to 10 seconds. When the level is set to
OFF, the time cannot be set.
1
Push up or down to select VAD Settings and
press or push the jog key to the right.
You can allow the player to set the recording level and time automatically.
Sync Setting
2
Push the jog key to the left or right to set the
time and press the jog key.
- The time can be set from 1 to 10 seconds and when it is
OFF, encoding does not stop and saved as a file even if no
sound is made between files encoded in the MP3 format.
1
Push up or down to select Sync Setting and
press or push the jog key to the right.
This is a feature that identifies mp3 files before saving them when there is no sound
for a specified time during the Line-In recording.
FM Optimize
Set the local FM reception areas and the preset detection levels.
2
Push the jog key up or down to select FM Optimize.
3
Press or push the jog key to the right.
-The submenu list “FM Optimize” will appear.
1
Press the MENU button.
- The main menu will be displayed.
FM Region Settings
2
Push the jog key up or down to select your current
location and press or push the jog key to the right.
KOREA/US : The player can scan through the FM frequency
ranging from 87.5 to 108.0 MHz in 100 KHz increments.
JAPAN : The player can scan through the FM frequency
ranging from 76.0 to 108.0 MHz in 100 KHz increments.
EUROPE : The player can scan through the FM frequency
ranging from 87.5 to 108.0 MHz in 50 KHz increments.
1
Push up or down to select FM Region and
press or push the jog key to the right.
Set the local FM reception region (country).
Document1 10/13/04 4:16 PM Page 40