User's Manual

Connecting to a PC

Recommended PC Environment

The following is required for normal operation of the player.

■ Pentium 133MHz or higher ■ CD-ROM Drive (2X or higher) ■ Minimum 20MB Free Space

■ Windows 98 SE/ME/2000/XP ■ Supports USB (1.1) ■ VGA Graphics

To transfer mp3 files from a PC, you need to first connect the PC to the MP3 player using the

USB cable provided. A new removable disk volume will be displayed in My Computer.

Connect the one end of the USB cable to the USB port of your PC.

Turn on the player and plug the other end of the USB cable into the USB port of the player.

- Do not unplug the USB cable during the USB driver installation. This may cause a malfunction

of the player.

When you see the internal message “Mass Connect” on the LCD, setup has successfully completed.

The system searches for a new device and the USB driver is installed. The installation

process may not be displayed. It is recommended checking the Device Manager if the driver

installation was successful.

When done, you’ll see “DM tech MP-00 Device” displayed in the list [Device Manager] as in

the figure below.

For problems with the installation as in the figure below, refer to the “USB Driver Manual

Installation”.

How to check USB driver

Windows 98:

Control Panel ➝ System ➝ Device Manager ➝ Disk Drives ➝

DM tech MP-00

Windows 2000:

Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝

Disk Drives ➝ DM tech MP-00 USB Device

Windows XP:

Control Panel ➝ System ➝ Hardware ➝ Device Manager ➝

Universal Serial Bus controllers ➝ Disk Drives ➝

DM tech MP-00 USB Device

Document1 10/13/04 4:16 PM Page 8