Specifications

Table Of Contents

3. Reliability Condition

3-1. Temperature Condition

§ Temperature Condition Test

Following test are performed in the condition with no dew condensation:

Cold Test: Tested after leaving the parts in -40°C±3°C for 240 hours and in the room temperature

for 2 hours.

Heat Test: Tested after leaving the parts in 80°C±3°C for 240 hours and in the room temperature for

2 hours.

Humidity Test: Tested after leaving the parts in the temperature 60°C±3°C, humidity 90 to 95% for 240

hours and in the room temperature for 2 hours.

Cycle Test: Tested after 5 cycles of leaving the parts in the temperature -30°C±3°C for 1 hour and in

the room temperature for 0.5 hours, then leaving the parts in the temperature 70°C±3°C

for 1 hour and in the room temperature for 0.5 hours.

Judgement: Must satisfy the following:

Activation Force: Must satisfy the specification.

Linearity: Must satisfy the specification.

Terminal Resistance: Must satisfy the specification.

Insulation Resistance: Must satisfy the specification.

Appearance: Must satisfy the specification.

4. Recommended Connector

4-1. Recommended Connector

Part No. Pins Pitch

KCA-K4R 4 pin Double-sided 1.25mm

Data Modul AG - www.data-modul.com