User manual

V Panel 104 / 121 / 150 / 170 / 190 User Manual

>> Select controler type

Value: DMC TSC-10 Series USB

>> Installation

Calibration

To get the according touch function you had to calibrate the touch.

To do this go to START/Programs/DMC/ Calibrate

Do the calibration with a touch stick on the displayed arrows.

Install ELO touch driver

Installation procedure

To start driver installation please go to the folder where the driver files are

stored. Start driver installation by double click on file “SW500930.exe” in the

respective folder. Confirm each opened window with “OK” or “NEXT” when

choice is done.

Please observe that during installation no error occurs.