User manual

http://www.kontron.com
7
Werner-von-Siemens Str.1
D - 93426 Roding
Tel: [phone] - 0
Fax: [phone] - 100
Do not leave the Panel in an unconditional environment. Storage temperature
above 70°C may damage the Panel.
The opening on the enclosure are for air convection, protect the Panel from
overheating.
DO NOT COVER THE OPENINGS
If the Panel is not in use for a long time, disconnect it from mains to avoid
possible damage by transient overvoltage.
If you had to open the housing of the Panel in service cases, all single parts of
the plant must first be switched off, after which the Panel can be disconnected
from the plant. Secure each part against accidentally switched on during service.
Following service activities on the Panel could cause failures.
• Metal objects such as screws or tools fall on or in the Panel
• Cables are removed or inserted during operation.
• Plug-in cards are removed or inserted during the Panel is
switched on.
All cautions and warnings on the Panel should be noted.
The system has to shut down and checked immediately by service staff, if one
of the following situation appears:
• The power cord or plug is damaged.
• Liquid has penetrated the Panel.
• The Panel is exposed to moisture.
• Obvious sign of breakage are visible.
• System did not work properly or you can not get it work
according to the application requirements.