eBox-2300SX-NWP User’s Manual DM&P Group eBox-2300SX-NWP User’s Manual DMP ELECTRONICS INC. 1 DMP Electronics Inc. E-mail: firstname.lastname@example.org Http://www.compactpc.com.
eBox-2300SX-NWP User’s Manual COPYRIGHT The information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may contain in this document, and makes no commitment to update or to keep current information contain in this manual.
eBox-2300SX-NWP User’s Manual TRADEMARKS ACKNOWLEDGMENT eBox-2300SX-NWP is the registered trademarks of DMP Electronics Inc. The brand names, product names or trade names appearing in this document are the properties and registered trademarks of their respective owners. All names mentioned herewith are served for identification purpose only. OWNER’S RECORD The serial number of this product is located at the rear panel of your eBox-2300SX-NWP.
eBox-2300SX-NWP User’s Manual SAFETY INFORMATION WARNING Do not expose eBox-2300SX-NWP to rain or moisture, in order to prevent shock and fire hazard. Never install eBox-2300SX-NWP in wet locations. Do not open the cabinet to avoid electrical shock. Refer to your nearest dealer for qualified personnel servicing. Never touch un-insulated terminals or wire unless your power adaptor and display monitor are disconnected.
eBox-2300SX-NWP User’s Manual REGULATORY FCC CLASS A NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
eBox-2300SX-NWP User’s Manual PURCHASE AGREEMENT PURPOSE: In accordance to the general commercial conduct of Trust and Fair Trade, herewith below is the agreement for the protection for both parties, DMP and Users in pursuant of trading. PRODUCT DESCRIPTION: With this product, herewith also known as eBox-2300SX-NWP, which is a simplified & an economical design of an embedded device.
eBox-2300SX-NWP User’s Manual NOTE: If there is other particular issue not listed in the above conditions, both parties agreed to follow the General Law of Commerce with fair and reasonable discussion in handling and resolving the argument. Table of Content Chapter 1 Product Package…………………………………………….…..1 1.1 Unpack and I/O Connecting…………………………………...2 1.2 Peripherals………………………………………………………..3 Chapter 2 Booting up the system………………………………………….4 2.1 Boot-up Screen…………………………………………………..4 2.
eBox-2300SX-NWP User’s Manual Chapter 1. Product Package 1. eBox-2300SX-NWP x 1。 2. Power-15W-3pin x 1。 3. Wireless Antenna x 1 (optional)。 1 DMP Electronics Inc. E-mail: email@example.com Http://www.compactpc.com.
eBox-2300SX-NWP User’s Manual 1.1 Unpack and I/O Connecting Overview Of eBox-2300SX-NWP 2 DMP Electronics Inc. E-mail: firstname.lastname@example.org Http://www.compactpc.com.
eBox-2300SX-NWP User’s Manual Chapter 1.2 3 DMP Electronics Inc. E-mail: email@example.com Http://www.compactpc.com.
eBox-2300SX-NWP User’s Manual Chapter 2. Booting Up the system 2.1 Boot-up Screen When you first power on the system, you are welcomed by the boot-up screen with running system bar on the bottom which indicate the loading status as shown on figure (2.1): 4 DMP Electronics Inc. E-mail: firstname.lastname@example.org Http://www.compactpc.com.
eBox-2300SX-NWP User’s Manual （2.1） 2.2 The Stand-By Mode If the LAN cable is connected to your system, An IP address for your system will be automatically obtained from your DHCP server. No additional configuration is necessary and the system is ready to be connected remotely for servicing. Your screen should look similar as below (figure 2-2): （2-2） 5 DMP Electronics Inc. E-mail: email@example.com Http://www.compactpc.com.
eBox-2300SX-NWP User’s Manual Chapter 3 Setup mode 3.1 Enter the Setup mode Press key anytime will bring you to the Network Settings setup mode. You will be able to choose from Wired or Wirelss connection on this screen shown as below (figure 3-1) (3-1) 3.1.1 Wired: This mode is the default setting. Press the key to choose this option if you wish to connected by LAN cable. An IP address will be obtained automatically from the DHCP Server If your system is connected by LAN cable.
eBox-2300SX-NWP User’s Manual 3.1.2 Manual IP setup: After you have choosed “Wired” Tab, use the arrow key to move to Change Settings option (see figure 3.1.2), then press . (figure 3.1.2) When you see a screen of Change IP Address as shown below (figure 3.1.3), use the arrow key to move between different section of IP Address, Subnet Mask, or Default Gateway and hit as you want to change these option.
eBox-2300SX-NWP User’s Manual (figure 3.1.3) 3.1.4 Wireless: This option enable you to choose the Wireless connection. Use the arrow key to move your selection to “Wireless” and press . After choosing this Wireless mode, move the arrow key to the WiFi Networks option, and press as shown below (figure 3.1.4) (figure 3.1.4) 8 DMP Electronics Inc. E-mail: firstname.lastname@example.org Http://www.compactpc.com.
eBox-2300SX-NWP User’s Manual If Wireless Access Point (AP) is detected (e.g 3Com) as shown on (figure 3.1.5) below, you may move the arrow key to choose from available AP by pressing . (figure 3.1.5) 3.1.6 WiFi Network Connect Use Automatic: Uncheck this box (if it is checked) by press the key Move the arrow key to choose Connect and press to use this deteced Wireless Access Point as illustrated on (figure 3.1.6) 9 DMP Electronics Inc. E-mail: email@example.com Http://www.
eBox-2300SX-NWP User’s Manual (figure 3.1.6) 3.1.7 Network Key When a screen of Network Key pop-up as (figure 3.1.7) shown below, you will be asking to provide the Network Authentication key for security reason. Fill in the blank space with your Network Key and choose . Please consult with your network system administrator if you need assist on this. (figure 3.1.7) 10 DMP Electronics Inc. E-mail: firstname.lastname@example.org Http://www.compactpc.com.
eBox-2300SX-NWP User’s Manual As figure (3.1.8) illustrated, after you have provided the Network key, the system will try to connect and negotiated with available Wireless Access Point. If the information you key-in is correct, the system will be indicated as ready for service by the “Status” showing (e.g Connected to 3Com ). (figure 3.1.8) Congradulation! You have finished all the steps to complete setting up the Wireless connection.
eBox-2300SX-NWP User’s Manual (figure 3.1.9) Chapter 4 Using Vista Connection 4.1 Starting Connection Using Vista to connect to network projector is simple and easy. The following section will provide detailed descriptions with illustration on how to use your Vista to connect to eBox-2300SX-NWP.
eBox-2300SX-NWP User’s Manual (figure 4.1.1) When you are first time trying to use the Network Projector, a screen will pop-up asking for your permission for further access as shown on Figure (4.1.2). Simply click on to go ahead to the next step. （Figure 4.1.2） 13 DMP Electronics Inc. E-mail: email@example.com Http://www.compactpc.com.
eBox-2300SX-NWP User’s Manual Next, you will be given an option to choose from the way to connect to the network projector as shown below. (Figure 4.1.3) (Figure 4.1.3) 4.1.31 Search for a Projector: This option is for automatically search for projectors that are connected to your network. The following screen as Figure (4.1.31) is an example of the number of network projectors found available for use. Choose the network projector you want to use, then click “Connect”.
eBox-2300SX-NWP User’s Manual (Figure 4.1.31) 4.1.32 Enter the projector address: Choose this option if you know the network address of the projector that you want to use. You will see the following screen as shown (Figure 4.1.32). 15 DMP Electronics Inc. E-mail: firstname.lastname@example.org Http://www.compactpc.com.
eBox-2300SX-NWP User’s Manual (Figure 4.1.32) Network Address: typing in the network address (For example, http://192.168.1.192) that appears on the Stand By mode of the eBox-2300SX-NWP. Projector Password: enter the four-digit Password (e.g 0007) which appears on the Stand By mode of the eBox-2300SX-NWP. After you have provided the required information correctly for Network address and Password, click on “Connect” and you should be able to connect to the Network Projector. 16 DMP Electronics Inc.
eBox-2300SX-NWP User’s Manual Chapter 5 WARRANTY TERMS AND CONDITIONS Warranty The warranty terms for eBox-4300 are twelve (12) months from the beginning on the date of invoice. During the warranty period, DMP Electronics Will repair replace the product covered under this limited warranty. 5.1 Service and Support DMP Electronics Inc. provides the technical support for hardware problems with your system throughout the warranty period.
eBox-2300SX-NWP User’s Manual Chapter 6 Technical Supporting Thank you for your supporting. If you have any technical problem using our product, please feel free to contact us: Customer Service: +886-2-2298-0770 DMP Electronics Inc. Monday to Friday: AM 08:30 ~ PM 17:30 Or E-mail to: email@example.com The website：http://www.compactpc.com.tw © The content and logo of the manual are possessed by DMP. DMP Company reserved the rights of revising manual without prior notification. 18 DMP Electronics Inc.