User`s manual

eBox-2300SX-NWP User’s Manual
DMP Electronics Inc.
E-mail: [e-mail]
Http://www.compactpc.com.tw
V
PURCHASE AGREEMENT
PURPOSE:
In accordance to the general commercial conduct of Trust and Fair Trade, herewith
below is the agreement for the protection for both parties, DMP and Users in pursuant
of trading.
PRODUCT DESCRIPTION:
With this product, herewith also known as eBox-2300SX-NWP, which is a simplified &
an economical design of an embedded device. The basic specification of this product
comprises of the x86 technology design, and with onboard 128MB System memory,
VGA Display, USB, PS2 Keyboard, PS2 Mouse, and LAN Interfaces.
DISTRIBUTION CONVENTION:
1. This Product includes a gift box, an inner case, PC, and Power adaptor. Upon
receiving this product, kindly please refer to the User’ Manual to check for the
contents and appearance of this product; Immediately contact your nearest
dealer or DMP office for any defective or missing parts. The supplier will not be
responsible for any reported discrepancy thereafter the expiration period of
3-days from the date of purchase.
2. In consideration of transportation and the cost of storage, the supplier provides
to the distributors a warranty of 12-months. This warranty covers the failure
caused by hardware breakdown (excluding hard drives), but does not cover the
act of misuse and mishandling.
3. The supplier will not accept unknown post. Therefore, if you wish to repair or to
return your goods, kindly please contact your nearest dealer to make your
declaration; and at the same time, apply for a RMA (Return Merchandise
Authorization) number.
4. The freight for return goods for repair will follow the International customary
practice and convention: Both parties are to pay for freight of one shipment each.
The shipper is required to prepay the freight from the place of origin (This means
that the returnee (user) covers the freight for return goods, while the Supplier
covers the freight for goods after the repair).
5. Obsolete warranty is referred to as: (1) Expiration of warranty or (2) Damage due
to misuse within warranty. The Supplier will be taken into consideration of the
circumstances, to provide repair service with charges expense for obsolete
warranty. This expense includes the cost of material and the cost of labor.