User Manual PCM-3343 DM&P Vortex86DX-1GHz SOC PC/104 SBC, LVDS ,TTL, dual LAN, CFC, and On-board memory
Copyright The documentation and the software included with this product are copyrighted 2012by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Product Warranty (2 years) Warranty Period ADVANTECH aims to meet the customer’s expectations for post-sales service and support; therefore, in addition to offering 2 years global warranty for ADVANTECH’s standard products, a global extended warranty service is also provided for customers upon request. ADVANTECH customers are entitled to a complete and prompt repair service beyond the standard 2 years of warranty.
Declaration of Conformity FCC This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Packing List Before installation, please ensure the following items have been shipped: Item Part Number: 1 PCM-3343 SBC 1 Startup manual 1 Utility CD Cables Part Number Description 1700060202 1 x CABLE 6P-6P-6P PS/2 KB & MOUSE 20cm 1703060053 1 x PS2 Cable 6P (MINI-DIN)-6P (Wafer 2.0 mm) 6 cm 1703100260 1 x USB cable 2port 2.0mm pitch w/ bracket 26cm 1701200220 1 x RS232 x2 ports 2.
PCM-3343 User Manual vi
Contents Chapter 1 General Introduction ...........................1 1.1 1.2 1.3 Introduction ............................................................................................... 2 Features .................................................................................................... 2 Product Specifications............................................................................... 3 1.3.1 Standard PC/104 SBC Functions ................................................. 3 1.3.
Chapter Chapter Chapter 2.21 2.22 Watchdog timer configuration ................................................................. 17 PC/104 Connector (CN8)........................................................................ 18 3 BIOS Operation ................................. 19 3.1 3.2 BIOS Introduction.................................................................................... 20 BIOS Setup .............................................................................................
A.21 A.22 A.23 A.24 A.25 A.26 A.27 LAN1 LED Connecter (CN19) ................................................................. 60 I2C Connecter (CN20) ............................................................................ 60 LAN2 LED Connecter (CN21) ................................................................. 61 VGA Connector (CN22) .......................................................................... 61 CF Socket (CN23)......................................................................
PCM-3343 User Manual x
Chapter 1 1 General Introduction This chapter gives background information on the PCM-3343.
1.1 Introduction The PCM-3343 is a fanless, cost-effective, small size (96 x 90mm) PC/104 SBC (Single Board Computer) geared to satisfy the needs for various industrial computing equipment. PCM-3343 is ideal for data-acquisition, environment monitoring systems, Intelligent Vehicle management, factory automation, and medical applications that require basic X86 computing power for various low-power, and cost-effective embedded applications. PCM-3343 is designed with DM&P Vortex86DX System-On-Chip.
Chapter 1 1.3 Product Specifications 1.3.1 Standard PC/104 SBC Functions Note! System Memory: Supports On board DDR2 333 SDRAM Memory 256 MB. Maximum up to 512 MB for optional 2nd Cache Memory: 256 KB on the processor BIOS: Award integrated 16 Mbit ROM in SOC Watchdog timer: System reset; Software programmable from 30.5 sec.to 512 sec. x 2 sets Expansion Interface: PC/104 (ISA) Battery: Lithium 3V/210 mAh Enhanced IDE interface: One channel supports up to two EIDE devices .
Keyboard/mouse connector: Supports one standard PC/AT keyboard and a PS/2 mouse USB: Four USB 2.0 ports compliant universal serial bus ports GPIO: 16 bit general purpose Input/Output I2C: Compliant w/t V2.1, Some master code (general call, START and CBUS) not support 1.3.2 VGA/LVDS Interface Controller: SMI SM712 2D graphic Chip VRAM: 4 MB internal memory Graphic Engine: – 62.
5 PCM-3343 User Manual General Introduction Dimensions: 96 x 90 mm (3.8" x 3.5") Mechanical Drawing (dxf file) is available. Power Supply Type: AT Power Requirement: +5 V ± 5%, +12 V ± 5% (Optional), (5 V only,12 V optional for PC104 add on card and LCD inverter) Power Consumption: (Vortex86DX 1GHz, 256 MB DDRII 667) – Power on Load: +5 V @ 0.63 A, +12 V @ 0.01 A – Max load: +5 V @ 0.85 A, +12 V @ 0.01 A – Idle mode: +5 V @ 0.55 A, +12 V @ 0.
1.4 Board layout: Dimensions Figure 1.1 PCM-3343 Dimension (Top) Figure 1.
Chapter 2 2 H/W Installation This chapter explains the setup procedures of the PCM-3343 hardware, including instructions on setting jumpers and connecting peripherals, switches, indicators and mechanical drawings. Be sure to read all safety precautions before you begin the installation procedure.
2.1 Jumpers The PCM-3343 has a number of jumpers that allow you to configure your system to suit your application. The table below lists the functions of the various jumpers. Table 2.1: Jumpers Label Function J1 LVDS Panel Power Select J2 COM2 RS-232/RS422/RS485 Select 2.2 Connectors Onboard connectors link the PCM-3343 to external devices such as hard disk drives, a keyboard, USB,or COM The table below lists the function of each of the board's connectors. Table 2.
Chapter 2 2.3 Locating Connectors & Block Diagram H/W Installation Figure 2.1 Connectors (Component Side) Figure 2.
CF Slave Primary Master IDE Single Channel On board DDR2 333 256MB (optional to 512MB) MAC+PHY 10/100 LAN1 Pin header connector ISA PC/104 connector IDE conn 4 USB Ports USB 2.0 DM&P Vortex86DX (1GHz) (256KB L2) 3 RS-232 1 RS-232/422/485 External SPI PS2 KB/MS SPI 16M-bit BIOS I2C conn 4MB flash 16 bit GPIO PCI Bus VGA connector 24-bit TTL connector 10/100 LAN2: RTL8100C-LF VGA TTL SMI-712 TTL-LVDS Transmitter 24-bit LVDS connector Figure 2.
You may configure your card to match the needs of your application by setting jumpers. A jumper is a metal bridge used to close an electric circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper, you connect the pins with the clip. To “open” a jumper, you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3. In this case you would connect either pins 1 and 2, or 2 and 3.
2.4 Setting Jumper 2.4.1 LVDS Panel Power Select (J1) Table 2.3: LVDS Panel Power Select (J1) Setting Function 1-2 3.3V (default) 2-3 5V 2.4.2 COM2 RS232/RS422/RS485 Select (J2) Table 2.
2.6 SPI Connector (CN1) The board provides 6-pin external SPI connector for external SPI device and peripheral usage. CN1 SPI Connecter Part Number 1653006101 Footprint PH_6x1V_2.00mm Description PIN HEADER 6*1P 180D(M) 2.0mm DIP W/O Pb Pin Pin Name Signal Type 1 +V3.3_SPI PWR 2 GND GND 3 SPI_CLK Out +3.3 V 4 SPI_DO Out +3.3 V 5 SPI_DI IN +3.3 V 6 SPI_CS# Out +3.3 V Signal Level 2.
2.7.1 CRT display connector (CN22) CN22 is a 12-pin, dual-inline header used for conventional CRT displays. A simple one-to-one adapter can be used to match CN22 to a standard 15-pin D-SUB connector commonly used for VGA. Users can drive a standard progressive scan analog monitor with pixel resolution up to 1024 x 768 @85Hz. Pin assignments for CRT display connector CN22 are detailed in Appendix A. 2.7.
2.10.1 Serial Port RS-422/485 (CN6) CN6 can be configured to operate in RS-422 or RS-485 mode by J2. The board supports 16-bit GPIO through GPIO connector. The 16 digital inputs and outputs can be programmed to read or control devices, with each input or output defined. Refer to Appendix for detailed information on the pin assignments and programming guide. Note! The Input power from external device cannot exceed 3.3 V. 2.
2.13.1 LAN1 Connector (CN24) DM&P Vortecx86DX is integrated with a Fast Ethernet MAC and Physical chip to provide the Fast Ethernet Control unit that has 32-bit performance, PCI bus master capability, and full compliance with IEEE 802.3u 100Base-T specifications and IEEE 802.3x Full Duplex Flow Control. LAN1 connection utilizes the Vortecx86DX Integrated Fast Ethernet Control unit on CN24 through an internal 10-pin right angle pin header. 2.13.
PCM-3343 provides one 6-pin JTAG connector for initial BIOS flash use through specific BIOS flash tool. It's only reserved for debugging. JTAG Connector Part Number 1653006101 Footprint PH_6x1V_2.00mm Description PIN HEADER 6*1P 180D(M) 2.0mm DIP W/O Pb Pin Pin Name Signal Type 1 +5V PWR 2 GND GND 3 TCK In +3.3V 4 TDO Out +3.3V 5 TDI In +3.3V 6 TMS In +3.3V Signal Level 2.
2.22 PC/104 Connector (CN8) PCM-3343 supports full ISA compatible functions via PC/104 connector (CN8). 20 x 2 (F) 2.54 mm 51.86 mm x 5.01 mm x 11.45 mm p = 3.40 mm 32 x 2 (F) 2.54 mm 82.34 mm x 5.01 mm x 11.45 mm p = 3.40 mm PC/104 negative voltage: One 3 * 1P pin header (CN16) supports -5 V/-12 V power input for ISA devices.
Chapter 3 BIOS Operation Sections include: BIOS Introduction BIOS Setup 3
3.1 BIOS Introduction AwardBIOS 6.0 is a full-featured BIOS provided by Advantech to deliver superior performance, compatibility, and functionality to industrial PCs and embedded boards. Its many options and extensions let you customize your products to a wide range of designs and target markets. The modular, adaptable AwardBIOS 6.
Press the key during startup to enter the BIOS CMOS Setup Utility; the Main Menu will appear on the screen. Use arrow keys to highlight the desired item, and press to accept, or enter the sub-menu. Chapter 3 3.2.1 Main Menu BIOS Operation Standard CMOS Features This setup page includes all the features for standard CMOS configuration. Advanced BIOS Features This setup page includes all the features for advanced BIOS configuration.
3.2.2 Standard CMOS Features Date The date format is , , , . Week From Sun to Sat, determined and display by BIOS only Month From Jan to Dec Day From 1 to 31 Year From 1999 through 2098 Time The time format is : : , based on 24-hour time. IDE Channel 0 Master/Slave IDE HDD Auto-Detection Press "Enter" for automatic device detection.
Hard Disk Boot Priority [Press Enter] This item allows a user to select the boot sequence for system devices such as HDD, SCSI, and RAID. USB Boot Priority [Press Enter] This item allows a user to choose the bootable USB device. First / Second / Boot Other Device Floppy Sets boot priority for the Floppy. Hard Disk Sets boot device priority for the Hard Disk. CDROM Sets boot device priority for the CDROM. USB-Device Sets boot device priority for the USB-Device.
Summary Screen Show [Disabled] Show all Motherboard information on POST. 3.2.4 Advanced Chipset Features Note! PDX-600 IO Config [Press Enter] This item allows a user to set Vortex86DX SOC UART resources. PDX-600 PowerDown Setting [Press Enter] This item allows a user to set LAN1 powerdown function. SMI712 VGA Setting [Press Enter] This item allows a user to set VGA related features. ISA Configuration [Press Enter] This item allows users to config ISA resources & IO/MEM wait state.
The "Integrated Peripherals" screen controls chipset configuration for IDE, ATA, SATA, USB, AC97, MC97 and Super IO and Sensor devices. The options on this screen vary depending on the chipset. On-Chip Primary IDE [Enabled] This item enables chipset IDE device 1 controller. Master PIO [Auto] This item allows a user to adjust master IDE mode type. BIOS default value is “Auto”. Slave PIO [Auto] This item allows a user to adjust slave IDE mode type. BIOS default value is “Auto”.
3.2.6 PnP/PCI Configurations Note! The "PnP/PCI Configurations" screen sets up the IRQ and DMA (both PnP and PCI bus assignments). Reset Configuration Data [Disabled] This item allow a user to clear any PnP configuration data stored in the BIOS. Resources Controlled By [Auto (ESCD)] – IRQ Resources This item allows you respectively assign an interruptive type for IRQ-9, 10, 11, 14, and 15. – DMA Resources This item allows you respectively assign a DMA for 0, 1, 3, 5, 6, and 7.
Load Optimized Defaults loads the default system values directly from ROM. If the stored record created by the Setup program should ever become corrupted (and therefore unusable). These defaults will load automatically when you turn the PCM-3343 Series system on. 3.2.8 Set Password Note! To enable this feature, you should first go to the "Advanced BIOS Features" menu, choose the Security Option, and select either System or Setup, depending on which aspects you want password protected.
To Establish Password 1. Choose the Set Password option from the CMOS Setup Utility Main Menu and press . 2. When you see Enter Password, enter the desired password and press . 3. At the Confirm Password prompt, retype the desired password, then press . 4. Select Save to CMOS and exit, type , then . To Change Password 1. Choose the Set Password option from the CMOS Setup Utility main menu and press . 2.
Type "Y" will quit the BIOS Setup Utility and save user setup value to CMOS. Type "N" will return to BIOS Setup Utility. 3.2.10 Quit Without Saving Note! Type “Y°” will quit the BIOS Setup Utility without saving to CMOS. Type “N” will return to BIOS Setup Utility. 29 PCM-3343 User Manual BIOS Operation Note! Chapter 3 3.2.
PCM-3343 User Manual 30
Chapter 4 Extension I/O Installation 4
4.1 Extension I/O Installation After apply force to the connector . the footprint of the modle / CPU board need to be inserted correctly.
Chapter 5 5 Software Introduction & Installation
5.1 S/W Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft Windows® embedded technology." We enable Windows® Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (hardware suppliers, system integrators, embedded OS distributors) for projects.
PCM-3343 supports software APIs including GPIO, I2C, backlight on/off, Brightness control, and Watchdog . 5.3.2.1 The GPIO API General Purpose Input/Output is a flexible parallel interface that allows a variety of custom connections. It allows users to monitor the level of signal input or set the output status to switch on/off a device. Our API also provides Programmable GPIO, which allows developers to dynamically set the GPIO input or output status. 5.3.2.
5.3.3 SUSI Utilities PCM-3343 supports software Utility including Embedded Security ID, Flash lock, eSOS, and BIOS flash 5.3.3.1 Embedded Security ID The embedded application is the most important property of a system integrator. It contains valuable intellectual property, design knowledge and innovation, but it is easily copied! The Embedded Security ID utility provides reliable security funtions for customers to secure their application data within embedded BIOS. 5.3.3.
SUSI supports many different operating systems. Each subsection below describes how to install SUSI and related software on a specific operating system. Please refer to the subsection matching your operating system. 5.3.4.1 Directory Contents \Library Susi.lib Library for developing the applications on Windows XP. \Demo Susi.dll Dynamic library for SUSI on Windows XP. SusiDemo.EXE Demo program on Windows XP. Susi.dll Dynamic library for SUSI on Windows XP.
5.3.4.2 Windows CE In windows CE, there are three ways to install the SUSI Library, you can install it manually or use Advantech CE-Builder to install the library or just copy the programs and the library onto a compact flash card. Express Installation: You can use Advantech CE-Builder to load the library into the image. First, you click the My Component tab. In this tab, you click Add New Category button to add a new category, eg. the SUSI Library.
Chapter 5 SusiDemo.exe The SusiDemo.exe test application is an application which uses all functions of the SUSI Library. It has five major function blocks: Watchdog, GPIO, SMBus, I2C and VGA control. The following screen shot appears when you execute SusiDemo.exe. You can click function tabs to select test functions respectively. Some function tabs will not show on the test application if your platform does not support such functions.
When the application is executed, it will display GPIO information in the GPIO INFORMATION group box. It displays the number of input pins and output pins. You can click the radio button to choose to test either the single pin function or multiple pin functions. The GPIO pin assignments of the supported platforms are located in Appendix B. Test Read Single Input Pin – Click the radio button- Single-Pin. – Key in the pin number to read the value of the input pin. The Pin number starts from '0'.
Chapter 5 I2C Display Control 41 PCM-3343 User Manual Software Introduction & Installation When the application is executed, you can read or write a byte of data through I2C devices. All data must be read or written in hexadecimal system. Read a byte – Key in the slave device address in Slave address field. – Key in the register offset in Register Offset field. – Click the READ A BYTE button and then a byte of data from the device will be shown on the Result field.
When the application is executed, it will display two blocks of VGA control functions. The application can turn on or turn off the screen shot freely, and it also can tune the brightness of the panels if your platform is being supported. You can test the functionalities of VGA control as follows: Screen on/off control – Click the radio button ON or push the key F11 to turn on the panel screen. – Click the radio button OFF or push the key F12 to turn off the panel screen.
Appendix A A Pin Assignments This appendix contains information of a detailed or specialized nature.
A.1 LVDS Panel Power Select (J1) J1 LVDS Panel Power Select Part Number 1653003100 Footprint PH_3x1V_2.54mm Description PIN HEADER 3*1P 180D(M) 2.54mm DIP WO/Pb Setting Function (1-2) +V3.3 (Default) (2-3) +V5 A.2 COM2 Select (RS232/RS422/RS485) (J2) J2 COM2 Select (RS232/RS422/RS485) Part Number 1653003260 Footprint PH_3x2V_S2.00mm Description PIN HEADER 3*2P 180D(M) 2.0mm SMD SOUARE PIN Setting Function (1-2) RS232 (Default) (3-4) RS485 (5-6) RS422 A.
CN2 LVDS Panel Connecter Part Number 1653910261 Footprint DF13_20V_S1.25mm Description CONN. SMD 10*2P 180D(M)DF13-20DP-1.25V(91) HRS Pin Pin Name Signal Type 1 GND GND 2 GND GND 3 LVDS0_D0+ OUT 4 NC 5 LVDS0_D0- 6 NC 7 LVDS0_D1+ 8 NC 9 LVDS0_D1- Signal Level OUT GND OUT 10 NC 11 LVDS0_D2+ 12 NC 13 LVDS0_D2- 14 NC 15 LVDS0_CLK+ OUT 16 LVDS0_D3+ OUT 17 LVDS0_CLK- OUT 18 LVDS0_D3- OUT 19 +VLVDS_PANEL PWR 20 +VLVDS_PANEL PWR OUT OUT A.
CN3 LCD Panel Connecter Part Number 1653920200 Footprint DF13_40V_S1.25mm Description CONN. 40P 90D 1.25mm SMD WO/Pb DF13-40DP-1.25V Pin Pin Name Signal Type 1 +V5_LCD GND 2 +V5_LCD PWR 3 GND GND 4 GND GND 5 +V3.3_LCD PWR 6 +V3.
CN4 PS2 Keyboard/Mouse Connecter Part Number 1655306020 Footprint WB_6V_2.0mm Description WAFER BOX 2.0mm 6P 180D(M) W/LOCK Pin Pin Name Signal Type Signal Level 1 KB_z_CLK In +5V 2 KB_z_DAT In +5V 3 MS_z_CLK In +5V 4 GND GND 5 +5V PWR 6 MS_z_DAT In +5V A.7 Power In Connecter (CN5) CN5 Power In Connecter Part Number 1655004110 Footprint W_4H_2.5mm Description WAFER 2.
A.8 RS422/RS485 Connecter (CN6) CN6 RS422/RS485 Connecter Part Number 1655304020 Footprint WB_4V_2.0mm Description WAFER BOX 2.0mm 4P 180D(M) W/LOCK A2001WV2-4P Pin Pin Name Signal Type 1 422_RXD- In 2 422_RXD+ In 3 485-422_TXD+ I/O 4 485-422_TXD- I/O A.
COM3/4 Connecter Part Number 1653003720 Footprint PH_10x2H_S2.00mm Description PIN HEADER 10*2P 2.
CN8 PC104 Part Number 00A0000005 165312022B 165313222B Footprint PC104 Description Pin Pin Name A1 IOCHCK A2 SD7 A3 SD6 A4 SD5 A5 SD4 A6 SD3 A7 SD2 A8 SD1 A9 SD0 A10 IOCHRDY A11 AEN A12 SA19 A13 SA18 A14 SA17 A15 SA16 A16 SA15 A17 SA14 A18 SA13 A19 SA12 A20 SA11 A21 SA10 A22 SA9 A23 SA8 A24 SA7 A25 SA6 A26 SA5 CN8 PC104 Part Number 00A0000005 165312022B 165313222B Footprint PC104 Description Pin Pin Name A27 SA4 A28 SA3 A29 SA2 A30 S
IRQ9 B5 -5V B6 DRQ2 B7 -12V B8 0WS# B9 +12 V B10 GND B11 SMEMW # B12 SMEMR# B13 IOW# B14 IOR# B15 DACK3# B16 DRQ3 B17 DACK1# B18 DRQ1 B19 REFRESH# B20 SYSCLK CN8 PC104 Appendix A Pin Assignments B4 Part Number 00A0000005 165312022B 165313222B Footprint PC104 Description Pin Pin Name B21 IRQ7 B22 IRQ6 B23 IRQ5 B24 IRQ4 B25 IRQ3 B26 DACK2# B27 TC B28 ALE# B29 +5V B30 OSC B31 GND B32 GND C1 GND C2 BHE# C3 LA23 C4 LA22 C5 LA21 C6 LA20
C14 SD10 CN8 PC104 Part Number 00A0000005 165312022B 165313222B Footprint PC104 Description Pin Pin Name C15 SD11 C16 SD12 C17 SD13 C18 SD14 C19 SD15 C20 NC D1 GND D2 MEMCS16# D3 IOCS16# D4 IRQ10 D5 IRQ11 D6 IRQ12 D7 IRQ15 D8 IRQ14 D9 DACK0# D10 DRQ0 D11 DACK5# D12 DRQ5 D13 DACK6# D14 DRQ6 D15 DACK7# D16 DRQ7 D17 +5 V D18 MASTER# D19 GND D20 GND PCM-3343 User Manual 52
CN9 GPIO Connecter Part Number 1653003720 Footprint PH_10x2H_S2.00mm Description PIN HEADER 10*2P 2.00mm 90D(M) SMD 21N22050-20J1 Pin Pin Name Signal Type 1 +5V PWR 2 +5V PWR 3 GPIO0_P0 I/O +3.3V 4 GPIO1_P0 I/O +3.3V 5 GPIO0_P1 I/O +3.3V 6 GPIO1_P1 I/O +3.3V 7 GPIO0_P2 I/O +3.3V 8 GPIO1_P2 I/O +3.3V 9 GPIO0_P3 I/O +3.3V 10 GPIO1_P3 I/O +3.3V 11 GPIO0_P4 I/O +3.3V 12 GPIO1_P4 I/O +3.3V 13 GPIO0_P5 I/O +3.3V 14 GPIO1_P5 I/O +3.
A.12 IDE Connecter (CN10) CN10 IDE Connecter Part Number 1653222262 Footprint BH_22x2V_S2.00mm Description BOX HEADER SMD 22*2P 180D(M) 2.
GND GND 27 IORDY Out 28 CSEL Out 29 DMACK# Out 30 GND GND 31 INTRQ In 32 NC 33 DA1 In 34 PDIAG# In 35 DA0 In 36 DA2 In 37 CS#1 Out 38 CS#3 Out 39 DASP# Out 40 GND GND 41 +5V PWR 42 +5V PWR 43 GND GND 44 NC Appendix A Pin Assignments 26 A.13 LAN2 Connecter (CN11) CN11 LAN2 Connecter Part Number 1653003719 Footprint PH_5x2H_S2.00mm Description PIN HEADER 5*2P 2.
A.14 COM1/2 Connecter (CN12) CN12 COM1/2 Connecter Part Number 1653003720 Footprint PH_10x2H_S2.00mm Description PIN HEADER 10*2P 2.
CN13 USB1/2 Connector Part Number 1653003718 Footprint PH_5x2H_S2.00mm Description PIN HEADER 5*2P 2.00mm 90D(M) SMD No.10 Pin Pin Name Signal Type 1 +5VSB PWR 2 +5VSB PWR 3 USB1_P- I/O 4 USB2_P- I/O 5 USB1_P+ I/O 6 USB2_P+ I/O 7 GND GND 8 GND GND 9 GND Chassis GND Signal Level A.16 LVDS Inverter Power Connector (CN14) CN14 Inverter Connector Part Number 1655000453 Footprint WB_5V_2.0mm Description WAFER BOX 2.
A.17 System Reset Connector (CN15) CN15 System Reset Connector Part Number 1655302020 Footprint WB_2V_2.00mm Description WAFER BOX 2P 180D(M) 2.0mm W/Lock Pin Pin Name Signal Type Signal Level 1 Reset In +3.3V 2 GND GND A.18 -12V / -5V Power In Connector (CN16) CN16 -12V / -5V Power In Connector Part Number 1653003101 Footprint PH_3x1V_2.00mm Description PIN HEADER 3*1P 180D(M) 2.
CN17 JTAG Connector Part Number 1653006101 Footprint PH_6x1V_2.00mm Description PIN HEADER 6*1P 180D(M) 2.0mm DIP W/O Pb Pin Pin Name Signal Type 1 +5V PWR 2 GND GND 3 TCK In +3.3V 4 TDO Out +3.3V 5 TDI In +3.3V 6 TMS In +3.3V Signal Level A.20 PWR / HDD LED Connector (CN18) CN18 PWR / HDD LED Connector Part Number 1653004101 Footprint PH_4x1V_2.00mm Description PIN HEADER 4*1P 180D(M) 2.
A.21 LAN1 LED Connecter (CN19) CN19 LAN1 LED Connecter Part Number 1653004101 Footprint PH_4x1V_2.00mm Description PIN HEADER 4*1P 180D(M) 2.0mm DIP WO/Pb Pin Pin Name Signal Type Signal Level 1 ACT_LED+ Out +3.3V 2 LINK_LED- IN +3.3V 3 ACT_LED- IN +3.3V 4 LINK_LED+ Out +3.3V A.22 I2C Connecter (CN20) CN20 I2C Connecter Part Number 1653004101 Footprint PH_4x1V_2.00mm Description PIN HEADER 4*1P 180D(M) 2.
CN21 LAN2 LED Connecter Part Number 1653004101 Footprint PH_4x1V_2.00mm Description PIN HEADER 4*1P 180D(M) 2.0mm DIP WO/Pb Pin Pin Name Signal Type Signal Level 1 ACT_LED+ Out +3.3V 2 100LINK_LED- I/O +3.3V 3 ACT_LED- IN +3.3V 4 1GLINK_LED- I/O +3.3V A.24 VGA Connector (CN22) CN22 VGA Connector Part Number 1655912120 Footprint WB_12H_S1.25mm Description Wafer Box 1.
A.
RESET# OUT 42 IDE_PDIORDY OUT 43 IDE_PDDREQ OUT 44 IDE_PDDACK# OUT 45 IDEACTS# I/O 46 IDE_P66DET# IN 47 IDE_PDD8 I/O 48 IDE_PDD9 I/O 49 IDE_PDD10 I/O 50 GND Appendix A Pin Assignments 41 A.26 LAN1 Connector (CN24) CN24 LAN1 Connector Part Number 1653003719 Footprint PH_5x2H_S2.00mm Description PIN HEADER 5*2P 2.
A.27 USB3/4 Connecter (CN25) CN25 USB3/4 Connecter Part Number 1653003718 Footprint PH_5x2H_S2.00mm Description PIN HEADER 5*2P 2.00mm 90D(M) SMD No.
Appendix B B IO System Assignment
B.1 System I/O Ports Table B.1: System I/O Ports Addr.
Appendix B IO System Assignment B.3 DMA channel assignments Table B.3: DMA channel assignments Channel Function 0 Available 1 Available 3 Available 5 Available 6 Available 7 Available B.4 Interrupt assignments Table B.
PCM-3343 User Manual 68
Appendix C C Watchdog Timer and GPIO Sample Code
C.1 Watchdog Timer and GPIO Sample Code C.1.1 [PCM-3343 WDT] Note : Index port(22h) = 13h, Data port(23h) = C5h : Unlock function port 22h/23h for GPIO/WDT0 works. Index port(22h) = 13h, Data port(23h) = 00h : Lock GPIO/WDT0 function. 1. WDT0 GPIO Registers Index port(22h) = 37h, Data port(23h) definition : WDT1 control register of bit 6 is enable WDT 1 control Index port(22h) = 38h, Data port(23h) definition : WDT1 signal select control register of bit 7-4 set 1101b as system reset.
1. GPIO Registers IO port 98h: GPIO 0 Direction register (0 = Input / 1= Output). IO port 99h: GPIO 1 Direction register (0 = Input / 1= Output). IO port 78h: GPIO data port 0 base address (0 = Low / 1 = High). IO port 79h: GPIO data port 1 base address (0 = Low / 1 = High). 2. Sample Code .model small .286p .stack .data .code main: mov dx, 98h ;GPIO 0 Direction port mov al, 0FFh ;Set GPIO 0 of 0 ~ 7 as output type.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
