User manual

25 PCM-3343 User Manual
Chapter 3 BIOS Operation
3.2.5 Integrated Peripherals
 On-Chip Primary IDE [Enabled]
This item enables chipset IDE device 1 controller.
 Master PIO [Auto]
This item allows a user to adjust master IDE mode type. BIOS default value is
“Auto”.
 Slave PIO [Auto]
This item allows a user to adjust slave IDE mode type. BIOS default value is
“Auto”.
 Master Ultra DMA [Auto]
This item allows a user to adjust primary master IDE mode type. BIOS default
value is “Auto”.
 Slave Ultra DMA [Auto]
This item allows a user to adjust primary slave IDE mode type. BIOS default
value is “Auto”.
 Master UDMA Mode [Auto]
This item allows a user to adjust primary master IDE mode type. The BIOS
default value is set to “Auto”.
 Slave UDMA Mode [Auto]
This item allows a user to adjust primary slave IDE mode. The BIOS default
value is set to “Auto”.
 IDE DMA transfer access [Disabled]
This item allows a user to adjust IDE DMA mode. This will increase IDE data
transfer speed. BIOS default value is set to “Enabled”.
 IDE HDD Block Mod [Enabled]
This item allows a user to enable or disable the IDE block data transfer mode.
This will speed up HDD data transfer efficiency. BIOS default value is set to
“Enabled”.
Note! The "Integrated Peripherals" screen controls chipset configuration for
IDE, ATA, SATA, USB, AC97, MC97 and Super IO and Sensor devices.
The options on this screen vary depending on the chipset.