User's Manual

CB Series PC104 Plus User’s Manual Software Installation
Windows NT
Installing the Driver
You will need to plug the board in an available PCI or PCI-X slot first, before installing the driver.
Note that these instructions use the CB-114 as an example. The procedure for installing all models
is the same.
1. Log into Windows NT as Administrator.
2. Locate the appropriate folder for your board’s drivers on the Document & Software CD. The
NT drivers will be located under the product folder in the \Software\WinNT directory (e.g.,
under \CB-114 Series\Software). Copy this folder to the PC’s hard disk and remember its
location.
3. In the Control Panel, open Network applet. On the Adapters tab, click Add. When
prompted to select a product, click Have Disk….
You will be prompted to enter the path to the driver. Enter the location of the drivers that you
copied from the Document & Software CD (C:\Windows.nt in this example) and then click OK.
3-2