User's Manual

CB Series PC104 Plus User’s Manual Software Installation
7. The board will now appear in the configuration panel (CB-114 Series in this example). Click
OK to return to the Network applet. After that, click OK again to exit the Network applet
8. Restart the PC. After you have logged back into Windows NT, you may check the event log
issued by the Moxa driver to see if the board’s ports have been initialized successfully. In the
Administrative group, open Event Viewer and select Log and System. For each newly
installed or configured Moxa UPCI board, check for a message stating that the board has been
enabled (e.g., “MoxaCB-114 board, with first serial port COM3, has been enabled”).
3-4