Installation Guide

AIMS Fast-Scan Radar v3.22 Installation and Operations Manual
DMT, LLC • DMT-M200-311 • 08/2009
59
Enter in the IP address of the AIMS radar server and click on Connect.
You will then be asked for your Username and Password. On all DMT units, an account is
created for “DMT Tech” with a password “dmtllc” (case – sensitive).
The network parameters are set using the standard Windows XP
local area network configuration screen, accessed by selecting
Control Panel - Network Connections - Local Area Connection,
which should generate a screen similar to the one shown at right.
To modify the network parameters, select the button Properties and
scroll down to select Internet Protocol (TCP/IP) and select
Properties (again). This will generate a new window that will
allow you to enter the new IP address, subnet mask and gateway
(lower right).
Be very careful entering this information and record the new
values – once set, your Remote Desktop connection will be
terminated and you will need to login again with the new IP
address to verify it has been properly set.