Installation Guide

AIMS Fast-Scan Radar v3.22 Installation and Operations Manual
DMT, LLC • DMT-M200-311 • 08/2009
77
5.3.1 Network Tab
The Network Tab primary function is to provide the interface to connect and disconnect from the
currently selected radar server.
5.3.1.1 System Status
When selected, the System Status button forces the built-in-test function to verify the operational
status of the serial communications ports, azimuth/elevation motors, and camera ComPort. If
properly operating, the relevant box is filled green, . If not, the box is filled red, .
5.3.1.2 Radar Address
The IP Address and Port # of the currently selected radar must be properly entered here before
the client may connect to it.
5.3.1.3 User
A unique User name must be entered here prior to attempting to connect to the current radar
server. If another client is connected to the radar server under the same username, the server will
reject the connect request.
SYSTEM STATUS
RADAR
ADDRESS
NETWORK
TRANSACTIONS
WINDOW
USER
CONNECT/DISCONNECT
RADAR
MARK
POSITION
‘HARD’ DISCONNECT
ERROR REPORTING WINDOW