Installation Guide

AIMS Fast-Scan Radar v3.22 Installation and Operations Manual
DMT, LLC • DMT-M200-311 • 08/2009
78
5.3.1.4 Connect/Disconnect Radar
When selected the client request to connect/disconnect from the radar server. When connected,
only the disconnect button is active and when disconnected only the connect button is active.
When attempting to connect/disconnect, both buttons will temporarily be disabled until the
server verifies the change in status back to the client.
5.3.1.5 “Hard” Disconnect
Rarely used, this button forces the immediate termination of the client connection to the radar
and does not wait for verification from the server. This should only be used if there is an
unnatural suspension of the connection status.
5.3.1.6 Network Transactions Window
This windows displays all the major network transaction activity between the client and the
server. The window may be cleared by selecting the Clear button on the upper right hand corner
of the window.
5.3.1.7 Error Reporting Window
This window displays both error reporting and special messaging from the server to the client.
The window may be cleared by double clicking the mouse in the window space.
5.3.1.8 Mark Position
When selected, the mark position checkbox allows a user to position the icon of the current radar
on the map background by placing the mouse on the location for the radar and clicking the select
button. This function only works when a map has been placed unto the background of the
display. (for details on how to make maps for AIMS, refer to document “Map Making for
AIMS).