Specification

DMX Plastics Limited. 300 Walker Drive, Brampton, Ontario L6T 4B3
Tel. [phone] Fax: [phone]
www.dmxmembranes.com
BETTER SCIENCE • BETTER PRODUCT
TECHNICAL DATA SHEET
DMX AG
TM
Wall
Waterproofing
Damproofing Foundation
MATERIAL
DMX uses a specially formulated High Density
Polyethylene that provides a high environmental stress
crack resistance to alkalines and acids found in the soil. In
addition, DMX is made from 70% recycled resin from
municipal recycling programs. Our special extrusion
process utilizes low heat and low shear to prevent heat
degradation in the final product. The use of antioxidants
and lubricants further ensure a smooth, superior quality
membrane that outperforms the competition.
PROPERTIES
DMX AG is an air gap membrane that exceeds today’s
most demanding building codes. DMX AG is completely
waterproof. It bridges cracks in the foundation and drains
away damaging moisture from the foundation. By
controlling exterior moisture DMX AG virtually eliminates
foundation leaks and expensive call backs. DMX AG has a
wide operating range, it installs quickly with smartly
designed accessories that help speed up installation. DMX
AG is inert, so no special breathing apparatus or skin
protection is required during installation.
For technical support, call our technical
support team at 1-855-501-7837 or visit
www.dmxmembranes.com.
ESR-2896 ICC Dampproofing and Waterproofing
13169-R CCMC Dampproofing Membrane
13182-R CCMC Foundation Drainage Systems
Product
Name
DMX AG
TM
Colour
Black/Grey
Material
HDPE
Dimple
Height
8mm
Compressive
Strength
3,500 to 4,000 lbs/ft
2
(300 kn)
Vapor
Permeance
< 4grams/m
2
/day
Temperature
Range
-25 (°C) - +70 (°C)
Chemical
Properties
Superior ESCR
Toxicity
Non-toxic
Weight per
unit area
650gr/m
2
Roll sizes
1.22m x 20m (4’ x 65’6”)
1.53m x 20m (5’ x 65’6”)
1.65m x 20m (5’5” x 65’6”)
1.85m x 20m (6’ x 65’6”)
1.98m x 20m (6’6” x 65’6”)
2.13m x 20m (7’ x 65’6”)
2.44m x 20m (8’ x 65’6”)
Service life
expectancy
> 50 years
TECHNICAL DATA
Waterproofing Membrane
TM