Quick Start Guide

5 Harmony Quick Start Guide
❼ Plug the external power adapter into an ‘always on’ wall outlet.
Your Harmony device will now boot-up and if scheduled, will
automatically begin content playback.
No further action should be required.
If you need to access the local user control page, please refer to the full
User Guide available online in the Client Support Hub at
moodmedia.com or call us at 1.800.345.5000.
❽ Turn on your visual display or speaker system and increase the
master volume in small increments until you reach your desired listening
level.
Please note that you may need to adjust your display or speaker volume
to match the level you are accustomed to. Due to normal differences
between any previous music player and your new Harmony device you
may need to try different volume settings. The volume on your Harmony
device is set to 100% from the factory, so adjust your display and/or
speaker system volumes slowly and carefully.
Congratulations! You should now be enjoying your content selections
on your Harmony device!
Please refer to the full online User Guide for more detailed operating
instructions. If you have any questions or comments, please call us toll-
free at 800.345.5000 or visit our Client Support Hub at moodmedia.com
NOTE: If a circuit breaker, wall switch or a timer controls the outlet you
are using please ensure it is always on. Improperly shutting down
electronic devices can cause premature failure.