Specifications

Page|9



Network Configuration



Wireless Network Activation and / or Static IP

The Marquee media player will automatically connect with Marquee servers using a wired

network. In some installations, you may wish to utilize a wireless network. To do so, perform

the following steps to activate the wireless network on the Marquee media player.

Note:

If performing a wireless setup you will need to know the following information in advance

of performing configuration:

– SSID

– Encryption Key Type (e.g., WEP/WPA)

– Passphrase type (ASCII/hex). If this is unknown, and the key contains only the letters

A-F and numbers, it is most likely a hex key.

– Passphrase or Key

Step By Step Instructions

• Attach a USB keyboard to the player.

• Apply power and start the media player.

• After the diagnostic screen concludes playback, simultaneously press CTRL – ALT – Q on

the keyboard. Playback will cease for 10 minutes. If you do not complete the following

within 10 minutes, you will need to press CTRL – ALT – Q again to exit playback.

• Simultaneously press CTRL – ALT – D on the keyboard. This will bring up the Network

Setup Utility. If during this process the player restarts or covers part of the screen, use

ALT – TAB to view the Network Setup Utility window. To close the Network Setup Utility

without saving changes, simultaneously press CTRL – C.

• Proceed with the setup process by entering your selection to each question and pressing

<Enter> to proceed to the next question.

• Once all the data has been entered the player will try to connect using the data entered

and display the message “* Reconfiguring network interfaces…”.

• When this is completed the IP address will be displayed near the bottom of the window.

• If a message is received stating “No DHCPOFFERS received.” Please recheck your

settings, exit the utility and restart the Network Setup Utility to begin again.

• Once setup is completed press <enter> as instructed to exit network setup.

• Reboot the media player. Upon restart, confirm connectivity and communication with

remote servers using the feedback provided on the Loading Screen.

• Should you require assistance, call DMX Customer Service at 800-345-5000.