Specifications

Page | 27

Scenario 4

1 Marquee player to 2+ screens; distance 3 to 50 feet

-VGA output from Marquee to DS VISION 3000. DS VISION 3000 CAT5 output to each

monitor. Cable runs will determine which DS VISION 3000 receiver is used. Runs of less than

150 feet will use the short receivers and runs of over 150 feet will need to use the long

receivers. Once the receiver has been chosen and placed at the monitor, connect to monitor

with short VGA patch cable.

HDMI output from Marquee to HDMI splitter (Atlona AT-HD-V14 1x4 HDMI); choose HDMI

patch cables that correspond to the lengths needed. If a cable run is less than 50 feet, cables

without repeaters may be used, but repeaters are recommended for best practice. Connect

feed to input on each monitor.

Scenario 5

1 Marquee player to 2 or 2 or more screens; distances 50 feet or more

See scenario 4 and use appropriate cables. HDMI solutions of over 50 feet to 100 feet, use

Atlona AT-HD v14 and adhere to best practices. Resolutions will decrease if distances exceed

the above scenarios from 1080p to 720p, and lower as the distances increase.

Scenarios 1 through 4 are considered Best Practices and will ensure best resolution to monitors.

Most manufacturers offer advanced solutions and should be utilized.

NOTE: most companies offer advanced engineering with no additional cost based on account

and dealer status.