Specifications

Touch panel controlled playback mode
Note: we suggest to not hold in your hand the DMXPen tablet during recording or operation playback
to avoid unintentional key press. Leave the product on the desk surface and touch the key with
one finger.
On standby all led will be switched off.
Pressing the first time key 1-6, show 1.bin-6.bin (if present) will be playback on both DMX and
ArtNet line and the associated led will blink 2 times in a short time with a long off time.
In case of show not present, the led associated to the relative key will blink slowly 2 timers and
after 2 second the device back to standby state.
During playback, the show runs an automatically loop mode.
Pressing the second time key 1-6, show 11.bin-16.bin (if present) will be playback on both DMX
and ArtNet line and the associated led will blink 1 times with a long off time.
Each time the key number will be changed, the show selection restart from show 1-6 in the first
pression and 11-16 in the second pression.
MIDI Remote control playback mode
The MicroSD card recorded session can be playback also through the MIDI port using a normal
MIDI device as a guitar MIDI foot switch, MIDI keyboard, or other MIDI device.
The DMXPen products are arranged to receive Program Change MIDI command, used in most
case from MIDI device to recall a preset.
A preset 1 recall will start show playback 1, preset 2 recall will start show playback 2, and so
on.
Manual / UK 9 DMXPEN
tablet