AFD102 10.2” FLIP DOWN WIDE SCREEN LCD WITH BUILT-IN DVD PLAYER Instruction Manual REV:10/10 www.dnaaudio.com.au www.dnaaudio.com.
Index Trouble Shooting If you experience operation or performance problems with this product, compare your installation with the electrical wiring diagram on the previous page. If problems persist, read the following troubleshooting tips which may help eliminate the problems.
Safety Alteration or modifications carried out without appropriate authorization may invalidate the users right to operate the equipment and void warranty. SAFETY PRECAUTION • In most countries it is against the law to watch TV [video] while driving it is recommended to check with your local police for exact legalities. • Safe driving should always be your priority • Do not attempt to modify or repair this unit it will void your SPL warranty.
Specifications On Screen Menu System The monitor incorporates an on-screen menu display systems which permits you to setup the DVD for a wide variety of installations and applications. Enter the menu system by pressing the SETUP button on the front of the monitor or the remote control. Pressing the SETUP button steps you through the six main screens of the menu system. These are, in order: System Setup, Language Setup, Audio Setup, Video Setup, Speaker Setup, and Digital Setup.
Wiring Diagram Contents The following accessories are included along with your flip down DVD player. Note: 1. Please remove the right-side of the dome light cover to define the door trigger. If it’s positive trigger (+12 Volt), please put the switcher to the left – hand side.
Wiring Diagram Monitor Installation On a towel or soft cloth, gently place the monitor assembly “face down” on a stable work surface. Using the wires provided, complete the audio, video and power connections in your vehicle as shown in the diagram below. CAUTION: Make sure the screws are NOT long enough to go through the roof! If you have any doubts about this type of installation, please consult your local mobile electronic retailer.
Monitor Installation Releasing and lowering the monitor To release monitor press open button carefully lower screen to your best viewing angle. Once the monitor is at best viewing angle the screen can swivel 10 degree left and right. When unit is not in use we recommend that you close the monitor. Remote Control Features FUNCTION FUNCTION Press this button to have the DVD feature function as below, and press again to change in to numeric key pad.
Remote Control Features EJECT AV MODE EJECT Press this button to stop playing and AV1 AV2 eject the disc. DVD AV MODE Press this button to select the display source. VOLUME INCREASE Press this button to increase volume. VOLUME DECREASE Press this button to decrease volume. SKIP BACKWARD Press this button to skip backward (chapters). SKIP FORWARD Press this button to skip forward (chapters). PLAY PAUSE ENTER PLAY/PAUSE A) Press once: to start playing. B) Press twice: to pause playing.
Remote Control Features Controls & Features Monitor Controls & Features 6) DVD EJECT 1) DVD POWER ON/OFF Press this button to stop playing This button turns the DVD system and eject the disc. on and off. 7) MONITOR OPEN SWITCH 2) AV MODE Press this button to select the 8) CONTROL SWITCH display source (DOOR/OFF/ON) MONITOR POWER Press this button to turn the monitor ON and OFF. 3) DVD SKIP BACKWARD 9) DVD INPUT Press this button to skip backward (chapters).