Photo Editing Software For Snap Lab User Manual — Exclusively for DNP Printers March 2020 Version 3.4.35.
Photo Editing Software User Manual 1. Contents 1. Contents .............................................................................................................................................2 2. License Agreements.............................................................................................................................6 Snap Lab Software Licensing Agreement ...........................................................................................................
Photo Editing Software User Manual Photobook.................................................................................................................................................................... 64 Card Print Product ........................................................................................................................................... 68 Frames Photo Card Prints ...............................................................................................................
Photo Editing Software User Manual Importing a Configuration File ................................................................................................................................... 121 Receipt............................................................................................................................................................ 122 Supported Receipt Printers .................................................................................................................
Photo Editing Software User Manual 14. Printers Configuration Support ........................................................................................................ 176 System Configurations ................................................................................................................................... 176 Printer Matrix ................................................................................................................................................
Photo Editing Software User Manual 2. License Agreements Snap Lab Software Licensing Agreement PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS SOFTWARE. USING THIS SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE WITH THESE TERMS AND CONDITIONS, PROMPTLY RETURN THIS SOFTWARE TO YOUR SUPPLIER. This Software License Agreement is a legal document between you (a single entity) and FIT Engineering S.r.l.
Photo Editing Software User Manual to the amount actually paid by you for the Software. Because some states and jurisdictions do not allow the exclusion or limitation of liability, the above limitation may not apply to you. If any provision of the Software License Agreement is declared by a court of competent jurisdiction to be invalid for any reason, such invalidity shall not affect the remaining provisions hereof.
Photo Editing Software User Manual 3. Introduction Photo Editing Software is a software system to make Prints, Calendars, Prints with Frames of various sizes and Passport photos. The software system allows the selection and editing of digital images to be printed with DNP printer(s) only. When the DS620 printer is connected with the respective media, the product line items will be enabled automatically; this will save the user time in configuring products. Photo Editing Software version 3.4.35.
Photo Editing Software User Manual Photo Editing Software version 3.4.25 provides the following features: • • • • • • • Printing images from mobile device using Wi-Fi: Allows Wi-Fi image transfers from your iOs and Android mobile devices. Bluetooth Image Tranfer Feature: Allows Bluetooth image transfer with your Android and Windows phones. Index Print for Print Job: print an Index print for the current print job. Credit Payment via SumUp: Using the Sumup payment functionality for credit cards.
Photo Editing Software User Manual • • • • Export / Import configuration Panoramic printer support Additional languages New themes for Calendar/Greeting Card/Photobook products • Under the Prints with Frames product selection, there are New Frames for the following square sizes: 4x4, 5x5, 6x6, and 8x8. • Other improvement items For assistance or support, contact DNP technical support at dnpsupport@dnp.imgcomm.
Photo Editing Software User Manual Quick Start Snap Lab System Setup Before you start working with the Photo Editing Software, connect and switch on the DS620 printer and the Wi-Fi router (PhotoPrints.) Then, turn on the Snap Lab (push the button rear side of the terminal). The Photo Editing Software will automatically display only products that can be printed with connected printers and loaded media when DS620 printer is connected (please, refer to the installation guide).
Photo Editing Software User Manual Supported Printers With Photo Editing Software you can print directly to DNP printers, without installing any drivers. Supported DNP printers are DS620, DS80DX, DS80, DS820, and QW410. Once connected to the Snap Lab system, the printer is automatically recognized by the Photo Editing Software. Color profile: The Photo Editing Software uses the most recent color profiles provided by DNP. You can also enter a color profile by entering settings/printer parameters.
Photo Editing Software User Manual Terms and Conditions Terms and conditions can be turned ON and OFF. To turn off Terms and Conditions: From the Admin screen, click the Settings button. Under the General section, click the Intial Parameters button. In the Display Terms & Agreements field, select ON or OFF. Note: The end user must accept the terms and conditions of the software before the images begin to load.
Photo Editing Software User Manual About Print Finishes In addition to the Glossy and Matte finishes, there are two (2) new photo finishes available: Luster : Available on both DS620 and DS820 printers Fine Matte: Available only on DS820 printer Attention: The software enables the photo finishes automatically for connected printers. If any settings have been configured/changed by the operator, then the software won’t propose default photo finishes.
Photo Editing Software User Manual 4. Loading Images The user can upload images to the kiosk from the following devices: • • • • • • • Memory Card USB iPhone/iPad Android Windows Phone PhotoPrints Wi-Fi Application Social Network These items can be turned ON or OFF by following these steps: 1. From the Admin screen, click the Settings button. 2. Under the General section, click the Photo Sources button. 3. Turn the upload devices ON or OFF as needed.
Photo Editing Software User Manual How to Load Images? The user can upload images to the kiosk from the following devices: • • • • • • • Memory Card USB iPhone/iPad Android Windows Phone PhotoPrints Wi-Fi Application Social Network 1. After selecting your product, the Image Source screen is displayed. 2. Insert your digital media into appropriate port of the Snap Lab Kiosk. 3. Select the digital media type from which you want to load images. Memory Card 1.
Photo Editing Software User Manual 3. The memory card must be removed to finalize the order. USB Device 1. Insert the USB stick into the USB port and the software will display images / folders of the media. 2. By selecting a folder, images contained in that folder are displayed. 3. Select images and press Next to load selected images. 4. The USB stick must be removed to finalize the order.
Photo Editing Software User Manual iPhone and iPad 1. After selecting the iPhone and iPad option, a selection screen with two possibilities is displayed. You can select Connection with Cable or Wi-Fi. Wired Connection for iOS: 2. If the device is not ready, then the software will make request to you verify your device. o o o Please unlock your mobile device before connecting. Please remove a security access. Please trust this system when a message pop-ups in your mobile device.
Photo Editing Software User Manual 3. The cable connection of the mobile device must be removed to finalize the order. Wi-Fi Connection for iOS: Note: Wi-FI connection for both iOS & Android requires ‘0PhotoPrints’ router. Make sure the router is well connected and powered ON. For Wi-Fi connection, the user is prompted to download and install the DNP PhotoPrints app for iOS devices. 1. Follow the instructions in the interface to transfer images from the DNP PhotoPrints app. 2.
Photo Editing Software User Manual Android 1. After selecting the Android option, a selection screen with two possibilities is displayed. You can select Connection with Cable or Wi-Fi. Wired Connection for Android: 2. 3. 4. 5. If the device is not ready, then the software will make request that you verify your device. Please unlock your mobile device before connecting. Please remove a security access. Please trust this system when a message pop-ups in your mobile device.
Photo Editing Software User Manual 6. The cable connection of the mobile device must be removed to finalize the order. Wi-Fi Connection for Android: Note: Wi-FI connection for both iOS & Android requires ‘0PhotoPrints’ router. Make sure the router is well connected and powered ON. For Wi-Fi connection, the user is prompted to download and install the DNP PhotoPrints app for Android devices. 1. Follow the instructions in the interface to transfer images from the DNP PhotoPrints app. 2.
Photo Editing Software User Manual Windows Phone 8 1. After selecting the Windows Phone 8 option, you are prompted to connect your phone by a cable. A mobile app is not currently available for Windows Phones. Note: Only Windows 8 Mobile OS is supported. Using the Direct Wi-Fi Image Transfer Functionality 1. From the Select the source screen, select the source iOS, Android, or Windows Phone.
Photo Editing Software User Manual 2. Select Direct Wifi. 3.
Photo Editing Software User Manual • • • • From your Smartphone/Tablet, go to your WiFi Setting and connect to the WiFi network « 0Photoprints » Scan the QR code on the terminal (some smartphone models need to download a QR scanner app) Or launch your Internet browser and type the URL address displayed on the terminal : o http://192.168.192.XXX:9090 On your web browser, a new interface allows for selection and transfer of the images to the Snaplab+ software. 4.
Photo Editing Software User Manual Using the Bluetooth Image File Transfer Functionality 1. On the Select the source screen, a new icon is available: Bluetooth. 2. Follow instructions displayed on the screen: • • • • • From smartphone/tablet, please activate Bluetooth. Select pictures to transfer. Select Transfer pictures by Bluetooth. Select the Bluetooth device: DNPKIOSK 99 Depending on smartphones, you may need a password for Bluetooth connection.
Photo Editing Software User Manual • Once pictures are transferred to Snaplab+, they will be displayed one by one on the software. 3. Click Next to continue.
Photo Editing Software User Manual 5. Event Mode How to Print in Event Mode 1. Select the desired Language. 2. From the Terms & Agreement screen, click the Accept button. 3. Click the Prints button 4. Insert your digital media into appropriate port.
Photo Editing Software User Manual 5. Select the digital media type from which you want to load images. Note: You can select one of the following: Memory Card, USB Device, iPhone or iPad, Android, Windows Phone, or Social Networks. 6. Select the images to be printed. 7. Selct the Next button. 8. Select Print Finish type. Note: Depending on the type of DS-Series printer connected, you can select from Matte, Glossy, Luster, and Fine Matte.
Photo Editing Software User Manual 9. When prompted, remove your input device. 10. The system begins printing your image.
Photo Editing Software User Manual 6. Ordering Products Prints, Double Sided Prints, Calendars, Greeting cards and Photobooks can be created with the following workflow procedures. Prints: DS620 To print a Single Sided Print product: 1. Click the Prints button. 2. Select media where images are located, as an example a folder with images. 3. Select images you wish to print. By clicking the + or – buttons, you can add or subtract the amount of prints for each image. 4. Click the Next button.
Photo Editing Software User Manual 5. Select Product and Paper Finish type. Note: Your available options will vary depending on the attached printer loaded media. 6. Click the Edit button if you wish to make any edits to your images. Note: Please see Editing Images in Kiosk Mode on page 78 to learn more about editing your images.
Photo Editing Software User Manual 7. At the Order Summary screen, you can view your current order, add additional products, cancel your order, etc. 8. Click the Next button 9. Type the Customer Name. 10. Click the Next button to finish the order. Passport: DS620 This is the workflow for creating and printing a passport product. 1. Click the Passport Photos button to make a passport product.
Photo Editing Software User Manual 2. Click the Passport Photos or All Countries button. 3. Select the digital media type from which you want to load images. 4. Select images.
Photo Editing Software User Manual 5. Select paper finish type. 6. Please wait while the system generates the passport product. 7. To edit the photo, click the Edit button. To change the current photo, click the Replace Photo button. 8. Click the + or – button to increase/decrease the quantity. Note: When the quality of the image is low resolution, the system displays a Low Quality message, as shown above.
Photo Editing Software User Manual 9. At the Order Summary screen, you can view your current order, add additional products, cancel your order, etc. 10. Type the Customer Name. 11. Click the Next button to finish the order.
Photo Editing Software User Manual Biometric Product Information Biometric Photo product (Optional License is required): Product name and date are printed on the final output. Passport All Countries: DS620 1. When the All Countries button is selected, the software displays a list of available countries.
Photo Editing Software User Manual 2. When you select a Country from the column on the left, the available ID products for that country are displayed in the column on the right, as shown below. Available choice for France.
Photo Editing Software User Manual Frames: DS620 This is the workflow for creating and printing image with Frames. 1. Click the Frames button. 2. Select the digital media type from which you want to load images. 3. Select your images. 4. By clicking the + or – buttons, you can add or subtract the amount of prints for each image.
Photo Editing Software User Manual 5. Select product and paper finish type. 6. Choose the desired Frame. 7. Edit the print quantity, crop and enhance images, and add text to your image as necessary. 8. To change to a different frame, click on Graphics tab and select the new frame.
Photo Editing Software User Manual 9. At the Order Summary screen, you can view your current order, add additional products, cancel your order, etc. 10. Type the Customer Name. 11. Click the Next button to finish the order.
Photo Editing Software User Manual Panoramic Prints Product Panoramic prints are great for displaying landscape, wildlife, nature and cityscape photographs. Printing panorama portraits on DNP Dye-Sub technology is an artistic and contemporary representation of your digital photos.
Photo Editing Software User Manual Panoramic Print Workflow: This is the workflow for creating and printing panoramic products. 1. Click the Panoramic Prints button. 2. Select the digital media type from which you want to load images. 3. Select a print size.
Photo Editing Software User Manual 4. Select photo finish type. Note: If a DS820 printer is connected, then the software enables the sizes for the DS820 printer and its media type automatically. If both a DS620 and a DS820, then the software enables the possible print sizes automatically of the printer(s) media type. 5. Select an image. 6. If you wish to make any edits to your image, click the Edit button and then make the desired edits.
Photo Editing Software User Manual 7. Once the edits are completed, click the Next button. 8. At the Order Summary screen, you can view your current order, add additional products, cancel your order, etc. 9. Type the Customer Name.
Photo Editing Software User Manual 10. Click the Next button to finish the order. Panoramic Collage The new panoramic collage prints anywhere from one to twenty images within one panoramic print. 1. Select Panoramic Collages. 2. Select your print size and print orientation.
Photo Editing Software User Manual 3. Select the print finish. 4. When prompted, load your images. 5. Select the images you want to include on your panoramic collage. You can select anywhere between one (1) and twenty (20) images.
Photo Editing Software User Manual 6. Select your background. Select the Use your photos button to add a loaded photo as the background image. If a theme is chosen, then the background is automatically selected for you. You can also change the background image on the final preview screen by selecting the Background option. 7. From the preview screen, review your product. 8. Click the Shuffle button to shuffle your images around within the collage. 9.
Photo Editing Software User Manual Calendars Single Page Calendars The calendar workflow has improved; you can now use one of your own photos as a background, and you can also select from a variety of calendar styles. Depending on the calendar template you choose, you can select either a one page calendar or a multi-page calendar (either 2 or 13 pages). If you select a multi-page calendar, you must select the minimum number of images as shown in the software. To print a calendar: 1.
Photo Editing Software User Manual 3. Select a print size. 4. Select a paper finish. 5. Select images.
Photo Editing Software User Manual 6. Change image sequence, if desired. 7. Select Calendar options: language, country (for national festivities) and starting month. Once you’ve made your selection(s), click the Edit button next to each field. 8. Click the Next button. 9. Select background theme. You may use one of your own images as the background theme. If decide to use one of your own images, the software will pick an image automatically.
Photo Editing Software User Manual 10. Select calendar type 11. Select calendar style. 12. The Page Preview screen is displayed. Make any desired edits. It is possible to zoom and center an image by clicking on it. It is possible to add text, clipart, change background and shuffle the position of images. 13. If you have ordered a multi-page calendar, make your changes on each page. 14. Click the Next button to finish the order.
Photo Editing Software User Manual 15. At the Order Summary screen, you can view your current order, add additional products, cancel your order, etc. 16. Type the Customer Name. 17. Click the Next button to finish the order.
Photo Editing Software User Manual Multi-Page Calendars (13 Pages Simplex) You can now print a 13 Pages Simplex Yearly Calendar, which is printed with the DS620 or DS820 printer. This 13 pages Simplex Yearly Calendar can be printed in the following sizes: • • • 4x8 6x8 8x12 To print a 13 Pages Simplex Yearly Calendar: 1. Click the Calendars button. 2. Select the digital media type from which you want to load images. 3. Select print size, in this case 6x8 (13 Pages).
Photo Editing Software User Manual 4. Select paper finish. 5. Select images. 6. Select a background theme. 7. Change the image sequence, if necessary.
Photo Editing Software User Manual 8. Select Calendar options: language, country (for national festivities) and starting month. Once you’ve made your selection(s), click the Edit button next to each field. 9. The Page Preview screen is displayed. Make any desired edits.
Photo Editing Software User Manual 10. At the Order Summary screen, you can view your current order, add additional products, cancel your order, etc. 11. Type the Customer Name. 12. Click the Next button to finish the order.
Photo Editing Software User Manual Collage Product With the Photo Editing Software, you can now print collages, using up to twenty (20) images. Printing Collages 1. Click the Collages button. 2. Select print size and orientation (i.e., horizontal or vertical.) 3. Select print finish.
Photo Editing Software User Manual 4. Select the digital media type from which you want to load images. 5. Select two (2) to eight (8) images. 6. Select background. You can also use one of your own images as a background. If ayou use one of your own images as the theme, then the software will select an image automatically. You can change the background image during final image preview by selecting Background.
Photo Editing Software User Manual 7. The Page Preview screen is displayed. Make any desired edits. 8. By clicking on an image it is possible to zoom and center it. 9. It is possible to add text, clipart, change the background, and shuffle the position of images. 10. Click the Next button to finish the process.
Photo Editing Software User Manual Duplex Print Products Double Sided Prints • • • The work flow for double-sided prints is same as the work flow for single-sided printflow. Landscape images are folded along the short edge. Portrait images are folded along the long edge. Long edge will mean that you turn from one page to the next along the long edge of the paper, much like an A4 magazine or brochure.
Photo Editing Software User Manual Printing Greeting Cards with the DS80DX Follow these steps to create and print a Greeting Card. 1. Click the Greeting Cards button. 2. Click the Double-Sided Photo Cards button. 3. Select the digital media type from which you want to load images.
Photo Editing Software User Manual 4. Select your images. 5. Select a paper finish. 6. Select a background theme.
Photo Editing Software User Manual 7. Change image sequence, if desired. 8. The Page Preview screen is displayed. Make any desired edits. See Editing Images in Kiosk Mode on page 78. 9. At the Order Summary screen, you can view your current order, add additional products, cancel your order, etc.
Photo Editing Software User Manual 10. Type the Customer Name. 11. Click the Next button to finish the order. Note: Greeting Cards: Are only available if DS80DX printer is connected and Duplex media loaded. Quantity: The default quantity for 4x8 Greeting Cards is 3 for 8x12 Media. The default quantity for 6x8 Greeting Cards is 2 for 8x12 Media. Photobook Follow these steps to create and print a Photobook. 1. Click the Photobooks button. 2. Select print size and orientation (i.e., landscape or portrait.
Photo Editing Software User Manual 3. Select the digital media type from which you want to load images. 4. Select your images. 5. Select a background theme.
Photo Editing Software User Manual 6. Select a paper finish. 7. Change image sequence, if desired. 8. Type a Book Title.
Photo Editing Software User Manual 9. Select an image for the cover of your Photobook. 10. The Page Preview screen is displayed. Make any desired edits. See Editing Images in Kiosk Mode on page 78. 11. At the Order Summary screen, you can view your current order, add additional products, cancel your order, etc.
Photo Editing Software User Manual 12. Type the Customer Name. 13. Click the Next button to finish the order. Card Print Product You can now print a personalized plastic card, selecting from various themes or by loading your own graphics. Card Print is available only if a HID Fargo DTC1250e is connected and powered on. Please refer to the user guide for the set-up of this Card printer. 1. Select Photo Cards. 2.
Photo Editing Software User Manual 3. Select if single side printing or double side printing. In this example, we will select double side printing. 4. Load your images. 5. Edit your images.
Photo Editing Software User Manual 6. Select Next to finish the order. Frames Photo Card Prints 1. Select Frames Photo Cards. 2. Select the type of Photo Card to be printed; Single Side or Double Side.
Photo Editing Software User Manual 3. Load your images. 4. Select a graphic. 5. Selecting Next will bring you to the final preview screen. It is possible to edit each side of the card. 6. Select Next and then finish the order.
Photo Editing Software User Manual Themes Phot Cards Print 1. Select Themes Photo Cards. 2. Select the type of Photo Card to be printed, Horizontal or Vertical, Single side or Double side. 3. Select a graphic category.
Photo Editing Software User Manual 4. Load your images. 5. Select a theme category. 6. Select a theme.
Photo Editing Software User Manual 7. Select two images, one for front side and one for back side. 8. Enter data in the card fields on the left side. After each entry the card preview will be updated. 9. By scrolling the list on the left side, it is possible to visualize all fields and to edit or change the loaded images.
Photo Editing Software User Manual 10. Selecting Next will bring to final preview screen. It is possible to add free position text and clipart. 11. Select Next and then finish the order. Index Print for Print Jobs Once the Index is activated in settings, a new screen appears before validating the print order asking to the end user whether they want to print and Index or not.
Photo Editing Software User Manual PSD File Structure for Photo Card Product Layout and Naming Convenstions Build your Photoshop Design File with the following layers, in the order provided, using the names provided. 1. Usertext_Name OPTIONAL – You can have multiple Usertext layers in your card design. Each Usertext layer allows customers to add their own text. Fill the Usertext field with name of the field. Usertext layers cannot extend into the trim line area.
Photo Editing Software User Manual Social Media Login Update Social Media logins for Facebook and Instagram are improved to comply with their current standards. (Vendor login rules change.
Photo Editing Software User Manual 7. Editing Images in Kiosk Mode Editing Simplex Products After loadingyour images, they can be adjusted with multiple tools: crop, effects, fine rotation, and red eye.You can also add text to your images. Edit In the workflow, click on the EDIT button control to have the editing options. Other products will present edit page during its workflow. • • • • Zoom: view images one by one. Sort: can be sorted by name or by date.
Photo Editing Software User Manual Effects By clicking on the AUTO button the selected image will be automatically adjusted by local density correction. • Auto Color Correction o Auto: On/Off toggle switch to enable Auto Color Correction for the selected image. o Auto All: On/Off toggle switch to enable Auto Color Correction for the all the images in the directory. o Manual: Enable adjusting the image colors manually.
Photo Editing Software User Manual Red Eye 1. Click on the + button and wait a moment. If red eye is not automatically corrected, click on the + button again. The maximum correction level is 3. • Red Eye o Click on the image to display the RedEye Control. o Select the correction area. o Click on the + to apply the correction. The maximum times you can press the + button is 3. Note: By default Auto Red Eye correction is enabled.
Photo Editing Software User Manual 4. Press Enter or the OK button to display the text on the image. 5. Select the text to position the text by dragging it, if necessary. 6. Select the text for further modification by clicking the yellow Pencil icon, if necessary. 7. Select the text and click on the Trash Bin icon to delete the text, if necessary.
Photo Editing Software User Manual To Add ClipArt: 1. Click the Clip Art button 2. Select the file. 3. Click the OK button and the clipart is displayed on the page.
Photo Editing Software User Manual Image Editing 1 2 • • • 3 2 Edit: Opens the editing window. Rotate: To rotate the image inside the box. The image is rotated 90°. Zoom: To enlarge and decrease image. Change position of image within the layout box.
Photo Editing Software User Manual Using Photo Filters You can add filters to your images. The following filters are available: • • • • • • • • • • Monochrome Retro Sepia Tilt-Shift Soft-Filter Original Cool-Monochrome Cross-Filter Illustration Mirror To access filters, click on the Edit button of any product workflow, and then click on the Filters tab.
Photo Editing Software User Manual 8. Understanding Order History 1. From the Admin screen, click the Orders button. 2. The Orders screen is displayed. • • • • • • Process: A previous order is reprinted. A copy of the order is created. Export photos: Selected images are exported to a specified folder. Export order: The selected order is exported to a specified folder. Delete: The selected order is deleted. Print page: Select pages are printed.
Photo Editing Software User Manual Event Mode – Print Quality Control • • Event mode now allows a limit for the number of images selected per order; min & max quantity. The quantity selection can be defined by each print product. • In this example the limit is 1 and the user tried to select 2. The error dialog appears.
Photo Editing Software User Manual 9. Hot Folder Print The Hot Folder Print function allows instant printing of images as they are dropped (copied) into a folder. There is one folder for each available print size. Folder name is same as related print size. As an example, to print a 10x15 cm sheet copy an image into folder: “C:\DS-Tmini_DNP Hot Folder\10x15”. The following image types are accepted in this version of Hot Folder Print: JPG/JPEG TIF/TIFF PNG BMP 1.
Photo Editing Software User Manual 2. To setup Hot Folder Print, enter Main panel, select Settings and then select Hot Folders. 3.
Photo Editing Software User Manual 4. Use the descriptions below to make any necessary changes: • • • • • • • Enabled: set Yes or No. If set to “No” the hot folder print function will be disabled. All settings will be kept in place. Default quantity: set default number of prints for each image copied into each folder. Paper type: set the paper finish to be used by all print sizes Use default borders: set Yes or No.
Photo Editing Software User Manual 10. Admin Settings – General 1. Access the Main Panel by touching first the left and then the right lower corners of the monitor. 2. Click on the Settings button. 3. The general settings screen appears. Initial parameters 1. From the Main Panel, press the Settings button. 2. From the Configuration screen, select the Initial Parameters option.
Photo Editing Software User Manual 3. Use the settings below to change your configuration: • • • • • • • • • • • Run Mode – Set to Auto to run the Snap Lab software automatically when you start the console. Manual mode requires operator interaction to start the software (double clicking the software icon). Show Cursor – Set to No to hide the system cursor (useful for touch screen devices). Set to Yes to show system pointer on the screen (useful for operation with a mouse).
Photo Editing Software User Manual Set Up Event Mode 1. Enter the Main Panel by touching bottom left corner and then bottom right corner of the screen. 2. Click the Settings button. 3. Under the General section of the Configuration screen, click the Mode button. 4. Click the Event button. Make sure the Event mode is selected. 5. Your DS Series printers are set to operate in event mode.
Photo Editing Software User Manual Event mode settings After setting your system to Event Mode, you can configure certain aspects of your system. You can use the scroll bar to reach all parameters. Description of each parameter • Allow all media: set Yes or No. If set to Yes, Photo Editing Software will show media loading screen at beginning of workflow • Directory with the event photos: if available, set the folder with images for the event.
Photo Editing Software User Manual • • • Use Default Borders: Set Yes or No. If set to Yes, images will be printed combined with PNG graphics set into the print channel. Partial Matte (For more details, please refer to the partial matte section page 18): Select from Disabled / Matte / Fine Matte / Luster. If set one of the 3 possible finishes, it will perform partial matte finish using the graphic set into the print channel. Photo Sources: Select Yes or No for each image souce.
Photo Editing Software User Manual • • • Image Editing: this is a duplicate of settings of kiosk mode. These settings will affect only Event mode. Channels: By selecting “channels” button it is possible to edit some parameters for each print output. As an example, select 15x20 cm / 6x8’’ and then select “edit” button. The channel settings window will be available. • Reset: Reset button function to reset the Event mode settings to standard kiosk mode as the software default settings.
Photo Editing Software User Manual • Frame must have same aspect ratio of the print channel.
Photo Editing Software User Manual • Partial Matte: Similar way of frame settings, it is possible to select partial matte graphic. Partial matte graphics must be selected in pairs: one for horizontal (landscape) images and one for vertical (portrait) images. A partial matte image is a JPEG file with white background and black graphics. Must have same aspect ratio of selected print channel. In correspondence to black graphic the printer will apply the paper finish selected into Event mode settings.
Photo Editing Software User Manual Partial matte can be applied to all products with exception of passport products. 1. To enable partial matte, enter Main panel, go to Settings, and select Mode 2. Select Kiosk. 3. Select Partial Matte and the finish you prefer, Matte in this example. 4. With the above setting, a portion of the print will have a matte finish. The rest of the image will hve the default print finish type (in this example, glossy).
Photo Editing Software User Manual The partial matte finish areas are defined by print channels, or graphic overlays which are used to distinguish matte area for each available print size. Graphic overlays must also be configured in pairs – one for the portrait (vertical) orientation and one for the landscape (horizontal) orientation. A graphic overlay is a JPEG file with white background and black masked area to define the partial matte placement.
Photo Editing Software User Manual 3. The Channels screen opens. Select the print size you want to adjust. Attention: You must import graphic overlays for both the horizontal and the vertical print size orientations. 4. Select a finish and orientation option (default/partial matte and horizontal/vertical). In this example, select Partial Matte (Horizontal). 5. Choose the graphic overlay you want to use from the listed options.
Photo Editing Software User Manual 6. If the overlay you want to use is not listed, add new overlays using the Import Files (import an individual overlay) or Import from Folder (import multiple overlays) options. 7. Repeat the above process for selecting the vertical orientation as well. 8. Once you have selected your overlays, the Channel screen displays your updated selections. 9. Press OK to save your changes. The partial matte overlay will now print on any images with that print size.
Photo Editing Software User Manual Screen Saver Use the Screen Saver section to make changes to the screensaver that is shown when the system is not actively in use. Navigating the Screen Saver Screen 1. Use the Up and Down arrow buttons to select the desired screen-saver. 2. To edit the settings for a screensaver, press the Edit button. 3. To delete a saved screensaver, press the Delete button. 4. To export a screen saver to another location, press the Export button. Creating a New Screen Saver 1.
Photo Editing Software User Manual As an example adding a new video screen saver is as easy as: 5. Select Video from the resource list. 6. Browse to the video location. 7. Press Open to open the video and return to the video resource settings. 8. Change the Repetitions and Frequence settings to your desired output. Repetitions defines the number of times a video will loop. Frequence defines the frequency the video will play.
Photo Editing Software User Manual 9. Click Messages and New to add a text message at the end of the video. 10. Enter your text and press OK to continue. 11. Click Close to close the message window. 12. You can preview the video or close the window when you finish. Language The Photo Editing Software offers the following languages.
Photo Editing Software User Manual Changing the Language Settings 1. From the Main Panel, select the Settings button. 2. From the Configuration screen, select the Languages option. 3. The following settings can be adjusted: • Administrator Language: Display language for the administrator section of the software. The software must be restarted for the changes to take place.
Photo Editing Software User Manual Direct Wi-Fi Image File Transfer from Mobile Devices This new feature offers the capability to the end-user to send pictures from their smartphones/tablets (iOS & Android) without downloading the mobile application. Note: Image transfer is also possible using the DNP mobile app for Android and-or iPhone. ATTENTION: To use this new feature, the Wi-Fi router must to be connected to the terminal and switched on. (WiFi router included in the Snap Lab DS-Tmini kit) 1.
Photo Editing Software User Manual 3. Click on Wifi without app. 4. Select Yes and click OK. 5. Restart the DS-Tmini/DT-T6mini.
Photo Editing Software User Manual Bluetooth Image Transfer 1. Connect the Bluetooth dongle to a USB port in the rear side, and a USB mouse to the USB port in front of the DS-Tmini/DT-T6mini. 2. Quit SnapLab+ software and go to Windows desktop. 3. On the Windows desktop, please double click on Control Panel icon. 4. Double click on Device & Printer. 5. Right-click on Generic Bluetooth Radio/CSR8510A10 with the mouse and select Bluetooth settings.
Photo Editing Software User Manual 6. Check the box : Allow Bluetooth devices to connect to find this PC 7. Uncheck boxes: - Alert me when a new Bluetooth device want to connect or 8. Click on Apply and OK.
Photo Editing Software User Manual 9. On Windows desktop, double-click on the Snaplab+ icon to restart the software. 10.
Photo Editing Software User Manual Photo Sources Use the following settings to define the sources from which images are uploaded to your system. • • • • Social Networks are Enabled: Allows loading of images from social networks. Yes enables the setting, No disables the setting. Internet connection is required for this feature to work properly. Favorite Directory 1-3: The system allows you to set up to three pre-configured directories from which users can load images.
Photo Editing Software User Manual • • • • • • Enable Text on Photos: Enables the text-on-image button for use. Enable ‘Auto’ Correction: Enables automatic color correction. This is for individual images. Enable ‘Auto All’ Correction: Displays the button to correct color automatically on all images. Enable Manual Correction: Allows for manual color correction to individual images. Enable Red Eyes: Displays a button for correcting red eye effect.
Photo Editing Software User Manual 3. Click on import files. 4. It will open the system file browser to select the file(s) to be used as graphics for Frames Photo Cards. 5. Click Open to import the file(s), click on close to close frames import window, close the program and restart the software. 6. New Frames are now available if you select Frames Photo Cards Product.
Photo Editing Software User Manual 3. Select Themes. 4. Select the Photo Cards tab. 5. Expand the Events category by double clicking on it; double click on the subcategory you want.
Photo Editing Software User Manual 6. Expand the subcategory and click New. 7. In the new window, select Graphic. 8. In the file explorer window, browse for the PSD file and open it. The preview of the graphic will be visible in the Graphic area. 9. Click OK, close all windows, and restart the software. The new graphic will be added to the category.
Photo Editing Software User Manual Adding Graphic for Logo for Photo Card Product 1. Enter into Main Panel by touching in sequence the lower left and right corners of the monitor. 2. Select Settings. 3. Select photo cards parameters. 4. Click on Default logo and browse for the image logo.
Photo Editing Software User Manual 5. A preview of the logo is displayed in the Photo cards parameters window. 6. With this setting, when preparing a card with a logo area, the preset logo is displayed. It will be possible to change the logo during the preview.
Photo Editing Software User Manual End User Information • • • • End user name is required: Requires the customer name to process the order. Room number is required: Requires a room number to process the order. This setting is especially helpful in for hotel and cruise ship applications. End user phone is required: The user must enter a phone number to process the order. E-mail is required: Requires an email address to process the order.
Photo Editing Software User Manual Process Order Confirmation The Process Order Confirmation section allows orders to be released in a variety of ways. • Order Confirmation Mode: allows for the following release options: • No Process confirmation: Releases an order when it is submitted. By default the system is configured with No Confirmation (automatic process). • Confirmation with Password: Enter a numeric password to release orders.
Photo Editing Software User Manual Delete Orders after Printing 1. To access setting for order removal after printing, enter Control panel select Settings. 2. Select initial parameters. 3. It will open a new window, select Delete all orders after print. Import/Export Settings You can apply a system configurations across multiple consoles. Exporting a Configuration File 1. 2. 3. 4. 5. Open the Main Panel and select the Settings button. From the Configuation page, select Export Data.
Photo Editing Software User Manual 6. When the system returns to the Configuration page, the export is complete. A few notes about the exported data: • Only availaible with the Snap Lab system. • The export process saves off all configuration data to the system. • The process can take up to 10 minutes. • If the save location is a portable drive (USB or SD), then the process can take longer. • If frames and templates are included in your system configuration, the process can take longer.
Photo Editing Software User Manual A few notes about the imported data: • Only availaible with the Snap Lab system. • The import process applies all configuration data to the system. • The process can take up to 10 minutes. • If the save location is a portable drive (USB or SD), then the process can take longer. • If frames and templates are included in your system configuration, the process can take longer. • Biometric data settings and licensing cannot be applied to other systems.
Photo Editing Software User Manual Supported Receipt Printers • • DS620 as receipt printer, the printer driver is already installed. o While using a DS620 as receipt printer, the supported print formats are 6x8 media (4x6 (10x15) & 6x8 (15x20) print sizes) and 5x7 media (5x7 (13x18 cm)). EPSON TM-T20 USB as receipt printer, the printer driver is already installed. o The device must be connected & configured to release the receipt printer.
Photo Editing Software User Manual 4. Click on OK to save your changes. Note: If you are using a DS620 printer for your receipts and you want to turn off receipt printing, follow the above steps and press the NONE button to remove the DS620 as the printer. Barcode and QR Code Settings Use the following section to add barcodes or QR codes to your receipt. Adding a Barcode for Each Product On the receipt ticket it is possible to print a barcode for each product.
Photo Editing Software User Manual 3. Select the EAN code field and enter the 12 digit EAN code for that product. Please note that Photo Editing Software will accept only 12 digits numeric code.Press OK to save your changes. Press OK again to save your product changes. 4. To enable barcode printing, open the Configuration screen and select Receipt. 5. Scroll down to the Print EAN code and set to YES. 6. If a product has an EAN code then this code will be printed on the ticket.
Photo Editing Software User Manual Adding a Barcode to Release the Order Attention: To use this feature, you must have an additional barcode reader device and a receipt printer. In addition to releasing orders with a password or by an operator, you can also release orders using a barcode. 1. To enable barcode release, enter the Configuration page and select Process Confirmation. 2. Select the Order Confirmation Mode field. 3. From the list, select Release by Barcode.
Photo Editing Software User Manual 4. Use the following information to update the rest of the settings. • • • Confirmation Password: Sets a 4 digit numeric password for operators to release the order. This is available incase the barcode scanner malfunctions. Printer to use for Unlock Code Receipt: Select the receipt printer where the barcode will be printed. It is best to have the barcode printer behind a counter or near the cash register.
Photo Editing Software User Manual 5. Locate the Print QR Code line and set the value to Yes.
Photo Editing Software User Manual GS1 Data Matrix Code In receipt settings there is one new 2d code available: GS1 DataMatrix. On the receipt, it is possible to print a GS1 DataMatrix 2d code at bottom of the ticket. This will allow automatic reading of order details. Information is written in GS1 DataMatrix format. If you are not sure of GS1 DataMatrix, please use QR code. The setup is similar to QR code setup.
Photo Editing Software User Manual 1. To enable GS1 code printing on the receipt ticket, enter the Control Panel and select Settings. Then select Receipt. 2. It will open the receipt settings. Scroll down to the Print GS1 DataMatrix and set the field to YES. 3. If needed, you can enter a 2 digit code to be used as the Internal Company Code in the GS1 DataMatrix printed code. 4. Select OK. Go back to Settings, and select Products.
Photo Editing Software User Manual 5. For each product to be tracked with GS1 DataMatrix code, select one product and then select Edit. 6. Select GS1 DataMatrix Additional Product Identification and enter the GS1 DataMatrix code for that product.
Photo Editing Software User Manual Order Management System The PES system now offers an order management system to manage several orders simultaneously. By enabling this feature, the software can stack multiple orders and allow the operator to decide when an order should be processed using a print processing screen. Enabling the Order Management System 1. Go to the Main Panel and press the Settings button. 2. From the Configuration screen, select the Process Confirmation option. 3.
Photo Editing Software User Manual 6. In the custom text field, enter any text you want the customer to see when trying to release an order. In this example, “Please contact the operator to release your order” is used. Press the OK button to save your custom text. Releasing an Order Let’s imagine an order with “Print” products is in the process and the name is given as “Test” 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Photo Editing Software User Manual Screen-Shots: Tap on the left & right side Enter Password : 4004 134
Photo Editing Software User Manual Software displays the order(s) list Select the order « Test » Click on ‘ Process ‘ button Click on ‘Ok’ to confirm the order Please wait…..
Photo Editing Software User Manual Printing Progress Screen Cancel button to ‘Terminate’ the order Software displays the order(s) list Screen Saver after successful printing of an order 136
Photo Editing Software User Manual Printer Parameters • • • Resolution: Option to choose 300x300 dpi or High Quality printing 300x600 dpi. Can split orders on many printers: if set to “yes” one order will be sent to all printers able to process that order (an order of 20 prints 4x6 with two DS620 connected and 6x8 media loaded will be split 10 images per printer). Custom color profile: it specifies a color profile to be used by each printer model. If no profile is set then default profile is used.
Photo Editing Software User Manual 2. When the Output Profile screen opens, select Color Corrections per Printer. 3. When the selection list appears, select your printer type and paper finish type from the list. Each printer will have multiple entries – one for each paper finish. If you have multiple printers, select the one with the correct serial number.
Photo Editing Software User Manual 4. Press the Edit button. The Color Corrections for Specific Printers box will appear. Description of the screen settings: • • • • • • • High Density Mode on Supported Printers: If set to True, high density mode is used when printing (currently available for DS820 printers only). Apply This Color Correction: If enabled, color correction is applied to anything printed using this printer and this color profile.
Photo Editing Software User Manual 4. Under the Products section, select Printer Parameters. 5. In the Output Profile dialog box, select Print Panorama Prints on These Printers.
Photo Editing Software User Manual 6. Select the printer which is going to handle panoramic prints when that product type is selected. Attention: Only one panoramic printer can be assigned for a DS620 or DS820. The software displays the panoramic printer serial-number and its media type for selection purpose. The software will display a warning message when there are an insufficient number of panels for Panoramic print(s).
Photo Editing Software User Manual Single Sided Greeting Cards • • • • • • • • Only available for DS80DX printers with duplex (double-sided) media loaded. You can enable this option for each print size in the category. The print sizes are available based on which printer is connected to the system. Print finish types by default have a finish type of manual so the customer can select from a list of available finish types. The default quantity for 4x8 prints is 3. The default quantity for 6x8 prints is 2.
Photo Editing Software User Manual Photobook • • • • • • • • • You can enable this option for each print size in the category. Assign the minimum and maximum number of pages, or sheets, per product. If the minimum and maximum page counts are equal, then the front side is used for the cover page, and the other pages are filled with images. If the number of pages is based on a page range, then number of pages in each order is based on the number of images loaded.
Photo Editing Software User Manual Adding a Passport Photo Product 1. Click New to add a new product. 2. Select Passport Photo or International Passport Photo from the product list. 3. Enter a product name. For example: Passport Photo_France 4. Enter each value carefully.
Photo Editing Software User Manual 5. To enter the configuration for each image on the passport photo, press the Passport Parameters button. Be sure to correctly enter each value. Ability to change from Oval to Rectangle Min face Height in mm Max face Height in mm Min face width in mm Max face width in mm Min distance from eyes Max distance from eyes Distance value in mm 6. Click OK to save your changes. 7. The new passport product has been added.
Photo Editing Software User Manual Passport Pricing: When a new passport product line item is added to the product, a pricing value can be added as well. • • By default, ‘All Countries’ can have only one pricing value. Any new product line can have its own priciong value. Prices 1. To setup prices an external keyboard is needed (not included with most configurations) • • • • Visible: White check (ON) means the product is visible to the customer. Add – Remove: Add or remove a price value.
Photo Editing Software User Manual • Service Fee: Fixed price for order. In cases of an order with multiple service fees only the maximum service fee will be added to the total. Price & Service displayed with an example amount. • Copy Prices/Paste Prices: Function to copy and paste the prices from one product to another. Note: For Photobooks and Calendars it is possible to set additional prices based on number of images.
Photo Editing Software User Manual Creating New Frames • • Defining the border: image format type .
Photo Editing Software User Manual • Example layout design for 4x6” / 10x15cm size: Attention: The photo editing software doesn’t allow editing existing templates. The frame/border must be created with third party software, like Adobe Photoshop. Import the designed borders/frames as an individual files or from a folder.
Photo Editing Software User Manual Template Design Parameters: • Defining the Template: image format type .JPG • (A) Define the overall template image size with the desired design ### ### Example of 8x12 @ 300 dpi: • 24003600 • (B) Save the template in .
Photo Editing Software User Manual 2. Click on Import Files. 3. 4. 5. 6. 7. The file browser opens. Browse to and select the file(s) to be used as frames. Click Open to import the file(s) Click Close to close frames import window Close the program and restart the software. The new frames are now available on all frame products. Themes Themes (for creative products) allow you to import backgrounds that are used to create personalized products. A theme is a group of backgrounds.
Photo Editing Software User Manual Adding New Themes from Images 1. From the Configuration page, click the Themes option. 2. Click New. 3. Enter a name for the theme. 4. Click the Backgrounds button.
Photo Editing Software User Manual 5. Click Image from .jpg file. 6. Enter the Image Name. 7. Click on Background Image and import your images. 8. Select the text color and the border color.
Photo Editing Software User Manual 9. Click OK to save your changes. 10. Close any other open windows and restart the software.The new theme is added to available themes. Password for Settings You can set up a password for the two types of users who would need to change the settings of your system.
Photo Editing Software User Manual 3. Select Adminstrator Password and enter the password. Confirm the password by selecting Confirm Admistrator Password, and entering operator password again. 4. If needed, it is possible to set the operator password. Select Operator Password and enter the password. Confirm the password by selecting Confirm Operator Password, and entering operator password again. 5. When entering settings, the user will have to type a password to get access.
Photo Editing Software User Manual 6. When logging in as an operator, a reduced number of settings will be available. 7. If the operator has access to prices and orders, two more options will be available.
Photo Editing Software User Manual Index Print for Print Jobs Snaplab+ software version 3.4 gives the possibility to print an Index Print for the current print job. When Index Print function enabled, the end-user will be presented with the option to add the index print to the print job or not. The price for the index print can be set separately from the regular prints. Configuration of Index Print 1. Go to the Main Panel and press the Settings button. 2. In the Product column, click on index print.
Photo Editing Software User Manual 3. In Enable index print dialog box select Yes. 4. In this new window, it is possible to customize the Index print a. Add the operator shop a logo. b. Index size print. c. Thumbnail image layout. d. Image file names printed. e. Minimum number of prints for index to be offered. f. Price for the index print. Payment by Credit Card via SumUp The SumUp functionality is a payment solution by credit card.
Photo Editing Software User Manual A SumUp account needs to be created to be able to use this new credit card payment. Please visit SumUp webpage: www.sumup.com to purchase the device and create a SumUp account online. Configuration of DSTmini for SumUp operation Preparation: Before beginning, connect the supplied DSTmini router to the network cable. Power on the DSTmini router; wait for the router lights to become green.
Photo Editing Software User Manual 5. A new window appears. The SumUp account information will be stored in this section. 6. Please connect the USB key with the .json file copied previously, in the USB port in front of the terminal. 7. Click on load from file and open the .json file. 8. The software will recognize SumUp account information and all fields will be automatically filled in. 9. Click on the test button to check if your SumUp account is available.
Photo Editing Software User Manual 11. Diagnostics Team Viewer When the system requires remote support, connect with an internet connection and provide the Team Viewer ID to the support person as needed. 1. 2. 3. 4. From the Main Panel, select the Diagnostics button. Select the Teamviewer option. When prompted, enter the password: dnppiesupport (in small letters with no space) Wait for the DNP-PIE Remote Support window to appear. Printer Status 1. From the Main Panel, select the Diagnostics button. 2.
Photo Editing Software User Manual Orders in Process To list the orders which are in process and therefore are not yet printable. All orders with any error condition are listed here. 1. From the Main Panel, select the Diagnostics button. 2. Select the Orders in Process option. 3. Following options are available: o Show Error: Displays details about any error conditions for the selected order. o Delete All Orders in Error: All orders with an error condition will be permanently deleted.
Photo Editing Software User Manual Card Printer Setup Photo card producta is possible only when a HID Fargo DTC1250e card printer is connected and installed to the system. Please contact you DNP reseller to purchase this Card printer model. 1. Enter into Main Panel by touching in sequence the lower left and right corners of the monitor. 2. Select Diagnostics. 3. Power on the Card printer and connect the USB cable. Select install card printer driver. 4.
Photo Editing Software User Manual Card Printer Test 1. To access card printer test, enter Control panel select Diagnostics. 2. Select test printer card. 3. If there is card printer installed, connected and powered on, a test card will be printed. 4. It is possible to select single side print test and dual side print test. Export Logs To create a compressed folder containing log files, useful to report eventual problems with the system. 1. From the Main Panel, select the Diagnostics button. 2.
Photo Editing Software User Manual Software Update 1. By clicking on the button Check for Updates the system will search for an update. If there is an update, the software will prompt a message to quit and launch the update process. 2. When there is an update, the following message is shown. 3. Click OK to continue and click Restart Application to restart the software and begin the update process. 4. If the software update has already been installed, the following message is displayed.
Photo Editing Software User Manual 3. Open the folder and access the installer file. Double-click on the installer and follow the installation instructions. 1 2 3 4 4. Click Finish (see image number above 4) and restart the system.
Photo Editing Software User Manual Software Update from USB You now have the ability to update your software using the Check for Updates on USB functionality. This update process is convenient for when your unit is off-line. 1. Download the software update file from DNP’s website. Attention: DO NOT change the name of the update file. 2. After the file has downloaded, copy it to a USB, and then connect the USB to the terminal. Note: It is preferable that the update file is the only file on the USB. 3.
Photo Editing Software User Manual HDD available space 1. To access check for hard disk drive available space, enter Control panel select Diagnostics. 2. Select system information. 3. It will open a pop-up window with information of total and available space for data on system disk.
Photo Editing Software User Manual 12. Statistics 1. 2. 3. 4. 5. Access the statistics screen from the Main Panel. Press the Stats button. Use this section to view production stats for the kiosk. It is possible to filter the information visible on the screen. It is possible to export the data in an Excel file for further analysis.
Photo Editing Software User Manual 13. Change Mode: Photo Editing Software vs Party Print By default the system is configured to Photo Editing Software, so to change the system configuration to Party Print the configuration mode must be changed. If you have a PartyPrint with the Snap Lab, please connect the PartyPrint license dongle to the Snap Lab and change the Wi-Fi Router and turn it on. Change to Party Print Mode 1. Exit the software. 2.
Photo Editing Software User Manual 7. Type the password 1600. Password : 1600 8. Click the Mode button quickly. 9. The advance control will disapper in 3-5 seconds. 10. By clicking on the Mode button the software will display 2 options: • Current Configuration: Photo Editing Software (Snap Lab); • Available Configuration: Party Print. Note: The current configuration won’t be accessible; as it’s the actual confuguration. This will be respected in any mode (Photo Editing Software vs Party Print). 11.
Photo Editing Software User Manual 13. Connect the PartyPrint dongle and change the Wi-Fi Router. 14. Click on OK and the system will restart in a few seconds automatically. 15. The system will launch the application Party Print Utility. 16. Please refer Party Print Utility user manual for more details. PartyPrint Utility provides same functions as PartyPrint. Note: PartyPrint Utility requires license dongle to work with the software. If not the system will display an error message.
Photo Editing Software User Manual The below screen is the main page of the Party Print software. Note: For more details on PartyPrint, please refer the user manual of PartyPrint. Launching the Same Mode Again Simply click on the ‘Restart Application’ button to re-launch the existing configuration software. Note: If the system current configuration is PartyPrint, then the system will launch PartyPrint Utility. Simply click on Save & Launch Party Print button (the steps above).
Photo Editing Software User Manual 6. To change the mode, click the Advanced button. 7. Type the password 1600. Password : 1600 8. Click the Mode button quickly. 9. The advance control will disapper in 3-5 seconds. 10. By clicking on the Mode button the software will display 2 options: • • Current Configuration: Photo Editing Software (Snap Lab); Available Configuration: Party Print. Note: The current configuration won’t be accessible; as it’s the actual confuguration.
Photo Editing Software User Manual 11. Click on Available Configuration, Snap Lab button control & follow the instructions. Note: Please follow the instruction carefully before clicking on the Ok button. Remove the PartyPrint dongle and change the Wi-Fi Router. 12. Click the OK button and the system will re-start in few seconds automatically. 13. The system will launch the software ‘Photo Editing Software’. 14. Touch the screen to start working with the system.
Photo Editing Software User Manual 14.
Photo Editing Software User Manual Printer Matrix SL+ Product Matrix in Centimeter: Product Print Products: Simplex Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Size Printer W Media 9 x 13 10 x 10 (Trim) 10 x 15 (10 x 15)2 (11 x 15)2 13 x 13 13 x 18 15 x 15 15 x 20 15 x 23 20 x 20 20 x 25 20 x 30 DS 620 / RX1 DS 620 / RX1 DS 620 / RX1 DS 620 / RX1 w 15x20 Media DS 62
Photo Editing Software User Manual SL+ Product Matrix in Inches: Product Print Products: Simplex Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Simple Prints Print Products : Panoramic Panoramic Prints Panoramic Prints Panoramic Prints Panoramic Prints Panoramic Prints Panoramic Prints Size Printer W Media 3.
Photo Editing Software User Manual DS820 Printer Support DS820 DNP is pleased to introduce brand new 8” inch printer with various features. Some Key Features: • • • • • More print formats/sizes New photo finishes: Luster, Fine Matte along with Glossy & Matte Rewinding function* Standby mode for less power consumption Supports standard digital media & High Quality media *Rewind function available only in certain global regions. Attention: DS820 printer detects both Standard & High Quality media.
Photo Editing Software User Manual RX1HS printer support The Photo Editing Software supports new RX1HS printer (HS: High Speed 20% faster than RX1): RX1HS Attention: RX1HS printer detects only HS media, where RX1 printer detects both standard & HS media. Please refer “Product Matrix” for supported product/print sizes for RX1HS. The products & print sizes are same for both RX1 & RX1HS printer. For more details on the RX1 HS printer, please refer to our website: http://www.dnpphoto.
Photo Editing Software User Manual 15. DNP DS-Printer Firmware Upgrade From the PES (photo Editing Software) version 1.4.31.7, the firmware upgrade for DNP Printers made it easy; i.e. the software will flash the firmware automatically when a DNP printer is connected with the system (Snap Lab Hardware). Firmware Upgrade Process - Automatic: Let us consider that the new software is properly installed in the system and the system has been restarted successfully. 1.
Photo Editing Software User Manual 4. Wait for the software finishes the firmware upgrade process. Attention: Please do not turn of the printer while the software is flashing the firmware. The firmware update is for DS620 and DS820 only; not for any other DNP DS Printers. The software won’t upgrade firmware on multiple printers (DS620/DS820) at the same time; always one printer at a time. For DS620 v: 01.41; DS820 v: 01.05 is the correct version for this software release.
Photo Editing Software User Manual 16. DS620 Printer 6x9 Firmware Update Some DS-620 printers may not be updated with 6x9 inch firmware. We apologize for the inconvenience. 1. 2. 3. 4. 5. Remove the 6x9 media and place the 6x8 media. The update cannot be performed with 6x9 media inside the printer. Exit from Photo Editing Software or from Party Print. Exit from Launchpad software. To change the mode, click on the advanced button. 6. Type the password 1600. Password : 1600 7.
Photo Editing Software User Manual 11. Open the folder ‘DS620_6x9_FW_Driver_Update_With Procedure’. Go to the folder VersionUpTool. 12. Double click on the file DP-DS620_0110_Win64. 13. Select Printer DP-DS620 14. Click on Start then click the End button when it is prompted. 15. If the printer is not connected then the software will display the below message. 16. Please check the printer USB is properly connected with the Snap Lab system.
Photo Editing Software User Manual 17. Printer Firmware DS40 v1.60 DS40 v1.60 FW update Functionality added with the DS40 v1.60 Firmware • 6x6 print size, square print Installing a newer firmware version into the DS printer will occur automatically when the DSTmini is power up. The status of attached printers, including the firmware version, can be accessed from Snap Lab ADMIN\Maintenance. Table – Printer Firmware Versions in SL ver3.4.25 Printer Model Firmware Version DS620 fw 01.52 DS80DX fw 1.
Photo Editing Software User Manual 18. Addendum A: Version 3.4.35.8 Enhancements Product Category Visibility You can now set whether Product Categories are visible or not to the end user. 1. From the Main menu, select Settings. 2. From the Products section, select Categories.
Photo Editing Software User Manual 3. From the Categories menu, select the product category you wish to make visble/invisible and then press the Edit button. 4. From the Category dialog box, type Yes in the Visible field to make the selected product category visible to the end user. Or, type No in the Visible field to make the selected product category invisible to the end user. 5. Press the OK button to save your changes.
Photo Editing Software User Manual Password Protection for Products This feature allows you to set a password for specific products. The password is set for selected products and NOT product sizes. To set a password for products: 1. From the Main menu, select Settings. 2. From the Products section, select Categories.
Photo Editing Software User Manual 3. From the Categories menu, select the product category you wish to set a password and then press the Edit button. 4. From the Category dialog box, tap the Password field to access the system keyboard. 5. Using the on-screen keyboard, type a password for the product and then press the green Enter button.
Photo Editing Software User Manual 6. From the Category menu, press the OK button. 7. From the Categories menu, press the Close button.
Photo Editing Software User Manual Print Finish Types You can designate print finish types, i.e. Glossy, Matte, Fine Matte and Luster, for each product. 1. From the Main menu, select Settings. 2. From the Products section, select Products.
Photo Editing Software User Manual 3. From the list of products on the left side of the screen, select a Product and press the Edit button. 4. Press the Paper Type field.
Photo Editing Software User Manual 5. Select each finish type in which you wish the product to be printed. Then press the OK button. 6. From the Products screen, press the OK button. 7. From the Product menu, press the Close button. New QW410 Printer The new QW410 Printer is now available for use with this product. This smaller, more lightweight printer sopports the following print sizes: • • • • • • • • • 4x4” 4x6” 4x8” 4.5x4.5” 4.5x5” 4.5x6” 4.5x8” 2x4” 2x4.
Photo Editing Software User Manual 19. Troubleshooting Contacting Technical Support For any technical issue(s) and/or question(s), please contact the support team at: dnpsupport@dnp.imgcomm.com DNP Imagingcomm America Corp.
