User's Manual

- 15 -

Remove the paper holder from the printer�

Remove the old paper roll from the paper

holder, and then set the new paper roll

ensuring there are no gaps�

If the paper protrudes, remove the roll from

the paper holder and set the edge face of

paper at.

Printer Installation

Caution

• The paper holders with a new paper roll set on it weigh approximately 2�0 kg� Do not let

them fall as they may cause physical injury or damage to the paper holders�

Set the roll so that

there are no gaps�

Set the paper so that

it does not protrude

from the roll�

• When removing the paper holders to change the paper roll etc�, make sure to

place them on the clean surface� Never place them directly on the table or work

spaces� If dust or dirt adheres to the media when setting the paper holder inside

the printer unit , it may adversely affect the print quality�

• When setting the media, make sure to use the plastic bag or sheet covering the

media. Never put it directly on the table, oor or work spaces.