User's Manual

- 18 -

Printer Installation

You can use the paper tray when printing L or PC size�

Up to 50 sheets can be stored, however it is recommended to remove the sheets regularly�

Attach the paper tray to the scrap box�

Lower the paper tray to set it�

Paper tray installation (DP-DS620 Series only)

Insert the tray horizontally�

Caution

• When printing sizes other than L or PC, do not attach the paper tray�

• Storing too many sheets may cause a malfunction�

• Do not apply too much strength on the paper tray� Otherwise, it may be damaged�

Close the mechanism unit�

When the mechanism unit is closed, the printer

starts paper initialization� (Five blank sheets

are output�) Paper initialization cuts off the

outer layer of the paper that may be dirty� Note

that paper initialization is not carried out if the

printer ON/Standby switch is set to ON after the

paper is set�

Caution

• Make sure that the scrap box is installed when printing. If not installed, your ngers may get

caught in the moving parts and be injured�

• If different width media (for example L-size and PC-size or 8inch-size and A4-size) are used

on the same printer, problems with the print quality such as lines on the print could arise�

Therefore, do not mix the use of different width media on one printer�