User's Manual

- 25 -
Transporting the printer requires the reuse of the original packing materials� The printer must be
packed in the same way it was at the time of purchase� If the original packaging materials are not
used and the printer is not packed correctly, the printer may be broken during transport�
Remove all Accessories and Attachments from the printer (print media ink ribbon, paper roll, USB
cable, power cable and paper tray) and store or transport them separately�
Please save the Print Head Protective Pad and do not throw away any packaging as you will need
them to safely transport the printer�
Accessories box
Place the sides marked TOP face up�
Put the Print Head Protective
Sheet on the Ribbon cassette
with tape�
* When transporting, secure the
front cover with tape to prevent
front opening�
(Width 25 mm, length 200 mm
or more)
▼ Match the printer orientation with
the arrows�
Wrap the
printer in
the sheet�
* Place the attachments in the accessories box�
Repacking