User's Manual

ManualsBrandsDNS ManualsBattery ChargersWireless Charging Pad

Table Of Contents

User manual

Wireless Charging Pad

Model

：

WD-268H

Manufacturer: SHENZHEN DNS INDUSTRIES CO., LTD.

Address: 23/F Building A, Shenzhen International Innovation Center,

No.1006 Shennan Road, Futian, Shenzhen, China

Thanks for purchasing this fantastic Qi Wireless charger. Please read the

manual in detail for proper operation before you get to start to use.

Summary of content (5 pages)

PAGE 1
User manual Wireless Charging Pad Model：WD-268H Manufacturer: SHENZHEN DNS INDUSTRIES CO., LTD. Address: 23/F Building A, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian, Shenzhen, China Thanks for purchasing this fantastic Qi Wireless charger. Please read the manual in detail for proper operation before you get to start to use.
PAGE 2
Contents 1. What is in the box 2. Product Introduction 3. Specification 4. How to use 5. Important Notification 6. FCC Statement & Warning 7.
PAGE 3
Conversion efficiency: ≥70%; Charging methods: induction model; Working frequency: 110 – 205KHz; FCC ID: ZBCWD268H How to USE 1) Plug Your Qi Wireless Charger to the Power Source Plug your charger connector into a wall charger which has a USB C female connector or into a PC USB C port. 2) Place Your Cellphone on the Qi Charger After you have connected the charger to a power source (either your computer or a wall outlet), all you need to charge your phone is simply place on top of the charger.
PAGE 4
Important Notification To protect people from harm and property loss, we make a clear explanation on what you do should obey: a) Warning! There are concerning the possibilities of death and severe wound: People who use heart-birth-maker should consult your doctor before you use this product; And please leave it at a distance of 22cm from the place where you install your heart-birth-maker, the electromagnetic wave have influence on heart-birth-maker’s work.
PAGE 5
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.