Operation Manual

- 40 -
English
Insert the batteries
• Slide open the battery cover.
• Place the batteries in the correct polarity as indicated and close
you may have to reset the time,the cover.
• Remove the batteries if you will not be using the HSQ2010
Recorder for an extended period. Leaking batteries may
damage the HSQ2010 Recorder
• If the HSQ2010 Recorder malfunctions, remove the batteries
and reinsert them.
• Stop the recorder before replacing the batteries. Removing
the batteries while the recorder is in use may corrupt the
fi le.
• When the batteries are nearly empty, the battery indicator
blinks.
• If it takes longer than 2 minutes to replace the battery, you
may have to reset the time.
Power on/off
• To power on, press the button until the display shows
HELLO.
• To power off, press the button while the recorder is stopped
until the display shows BYE.
Getting started