Technical information

- 26 -
English
Editing messages
Add to the end of a message
1. To add to a recorded message, start the playback (ref. playback) of the
message which should be extended.
2. Press the REC/STOP button for more than 1 sec. until the display shows
ADD-R.
The MemoPen Data starts to record automatically, beginning at the end of the message
(all other feature ref. Recording).
Divide a message
To divide a message proceed as follow:
1. Start the playback (ref. playback) of the message to be divided.
2. Press the PAUSE/DISP button at the point where the message should be
divided. On the display appears PAUSE.
3. Press the MENU button (jog slide key) until the display shows OFF DIV.
4. Use the / button (jog slide key) to select ON DIV. To divide the
message press the MENU button (jog slide key). The second part of the
message has the message number + 1 from the original message. All
message numbers after this message will increase by one.
In case there are already 99 messages in the folder or the
message is shorter than 2 sec., it is impossible to divide
the message. On the display appears CAN NOT.
If the recorded message is long, it takes some time to
divide it. The new message still has the date and lock
information of the original message.
Don’t remove the battery during division of the mes-
sage. The message will be destroyed and can’t be played
again.