User Guide
Table Of Contents
- 1. Security Precautions
- 2. Introduction
- 3. Hardware Installation
- 4. Electrical Specifications
- 5. Installation and Commissioning
- 5.1 Installing Software
- 5.2 Connecting Power Supply
- 5.3 Connecting Emergency Stop Switch
- 5.4 Connecting External Cables
- 5.5 System Commissioning
- 6. Operation
- 7. Maintenance
Dobot M1 User Guide 7 Maintenance
Issue V1.0.4 (2018-08-30) User Guide Copyright © Yuejiang Technology Co., Ltd
99
NOTE
There are two battery interfaces on the Driver Board, as shown in the red box of Figure
7.11. You need to connect the battery adapter to the unused battery interface.
Figure 7.11 Battery interfaces on the Driver Board
Figure 7.12 Connect the battery to the batter adapter