Manual

Conveyor Belt User Guide 4Position Adjustment
Issue V1（2019-03-26） User Guide Copyright © Yuejiang Technology Co., Ltd.
11
Figure 4.7 Modify picking position
 Adjust color-identified position
1. Select SuctionCup to pick up the block, and then press and hold down the Unlock
button to move the Dobot 2 to make the block above the color sensor. The distance
range between the color sensor and block should be 5mm to 10mm. As shown in
Figure 4.8.
Figure 4.8 Adjust color-identified position
2. The operation panel on the DobotStudio will record the values of X, Y, Z axes
automatically, and write the values of the X, Y, Z axes in the sorting demo as shown
in Figure 4.9.