Manual

Conveyor Belt User Guide 6Precautions
Issue V1（2019-03-26） User Guide Copyright © Yuejiang Technology Co., Ltd.
17
Setting home position
Step 1. Open DobotStudio, connect Dobot Magician and click Teaching&Playback as
shown in Attach Figure 6.1.
Attach Figure 6.1 Teaching&Playback
Step 2. Click + point to save a point of which the axes X, Y, Z, R are 250, 0, 50, 0 respectively.
You can set the point based on site requirements.
Attach Figure 6.2 Add Point
NOTE
Make sure that this position is in the workspace of the Dobot Magician.
Step 3. Select this point and right-click SetHome. As shown in Attach Figure 6.3.