Manual

Sliding Rail Kit User Guide
Issue V1.1 (2021-12-03) User Guide Copyright © Yuejiang Technology Co., Ltd.
6
Connect the MG400 E-STOP port to the MG400 emergency stop switch using
the Extended wiring harness of MG400 emergency stop unit.
The emergency stop port of the servo drive is short-circuited. You can connect
the Emergency stop terminal to the E-STOP port of the servo driver as required.
Connect the DI wiring harness to the DI port of the MG400.
Connect the DO wiring harness to the DO port of the MG400.
Connect LAN1 port of the MG400 to the network port of the computer using
network cable.