Manual
Table Of Contents
- 1. Security Precautions
- 2. Quick Start
- 3. Introduction
- 4. Interface Description
- 5. Operation
- 5.1 Introduction to the DobotStudio
- 5.2 Performing Teaching & Playback Tasks
- 5.3 Working in Offline Mode
- 5.4 Writing and Drawing
- 5.5 Performing Laser Engraving Tasks
- 5.6 Engraving a Grayscale Image
- 5.7 Controlling with your Hand Gesture
- 5.8 Controlling with your Mouse
- 5.9 Operating 3D Printing
- 5.10 Calibration
- 5.11 Connecting with WIFI Kit
- 5.12 Connecting with Bluetooth Kit
- 5.13 Operating Blockly
- 5.14 Scripting
- 5.15 Operating Stick Controller Kit
- 5.16 Operating Sliding Rail
- 5.17 Multiplexed I/O Demo
- Appendix A Dobot Magician Homing Operation
Dobot Magician User Guide 5 Operation
Issue V1.7.0 (2019-01-09) User Guide Copyright © Yuejiang Technology Co., Ltd.
98
Hand gesture
Robotic arm’s movement
Move your palm up, down, front,
back, right, or left
The robotic arm moves accordingly
Clench your fist
Control the air pump to suck air
Unclench your fist
Turn off the air pump
Controlling with your Mouse
You can use the Mouse function module of the DobotStudio to perform tasks, for example,
grab or suck an object with your mouse. This topic introduces how to move a small cube with
a mouse.
Prerequisites
The Dobot Magician is powered on and connected to your computer.
The suction cup kit has been installed. For details, see 5.2.1 Installing a Suction Cup Kit.
Procedure
Figure 5.113 Click Mouse