Manual
Table Of Contents
- 1. Security Precautions
- 2. Quick Start
- 3. Introduction
- 4. Interface Description
- 5. Operation
- 5.1 Introduction to the DobotStudio
- 5.2 Performing Teaching & Playback Tasks
- 5.3 Working in Offline Mode
- 5.4 Writing and Drawing
- 5.5 Performing Laser Engraving Tasks
- 5.6 Engraving a Grayscale Image
- 5.7 Controlling with your Hand Gesture
- 5.8 Controlling with your Mouse
- 5.9 Operating 3D Printing
- 5.10 Calibration
- 5.11 Connecting with WIFI Kit
- 5.12 Connecting with Bluetooth Kit
- 5.13 Operating Blockly
- 5.14 Scripting
- 5.15 Operating Stick Controller Kit
- 5.16 Operating Sliding Rail
- 5.17 Multiplexed I/O Demo
- Appendix A Dobot Magician Homing Operation
Dobot Magician User Guide 5 Operation
Issue V1.7.0 (2019-01-09) User Guide Copyright © Yuejiang Technology Co., Ltd.
102
After installing 3D printing kit, you can import 3D module into the 3D printing software for
3D printing. Figure 5.118 shows the 3D printing process.
Figure 5.118 3D printing process
During 3D printing, the 3D printing control software is required. You can use Repetier Host
or Cura software for 3D printing.
Reptier-Host: Reptier-Host can slice with the third party slicing (such as
CuraEngine, Slic3r, etc), check and modify G-Code, control 3D printing manually. More
parameter settings make Reptier-Host very flexible.
Cure: The slicing of Cura is fast and stable. It has strong inclusiveness to 3D model
structure and less parameter settings.
NOTICE
This section uses Windows as an example to describe how to perform 3D printing with
Repetier Host and Cura. For Mac OS, only Cura is supported.
Installing 3D Printing Kit
3D printing kit contains extruder, hot end, motor cable, filament, and filament holder as shown
in Figure 5.119.