Manual
Table Of Contents
- 1. Security Precautions
- 2. Quick Start
- 3. Introduction
- 4. Interface Description
- 5. Operation
- 5.1 Introduction to the DobotStudio
- 5.2 Performing Teaching & Playback Tasks
- 5.3 Working in Offline Mode
- 5.4 Writing and Drawing
- 5.5 Performing Laser Engraving Tasks
- 5.6 Engraving a Grayscale Image
- 5.7 Controlling with your Hand Gesture
- 5.8 Controlling with your Mouse
- 5.9 Operating 3D Printing
- 5.10 Calibration
- 5.11 Connecting with WIFI Kit
- 5.12 Connecting with Bluetooth Kit
- 5.13 Operating Blockly
- 5.14 Scripting
- 5.15 Operating Stick Controller Kit
- 5.16 Operating Sliding Rail
- 5.17 Multiplexed I/O Demo
- Appendix A Dobot Magician Homing Operation
Dobot Magician User Guide 5 Operation
Issue V1.7.0 (2019-01-09) User Guide Copyright © Yuejiang Technology Co., Ltd.
124
Parameter
Description
GCode Flavor
The style of GCode
Please select RepRap Marlin/Sprinter
Build area shape
Build the area shape
Please select Circular
Serial port
Serial port
Please select the corresponding serial port
Baudrate
Baud rate
Please set to 115200
Set slice parameters, and select File > Open Profile to import these parameters,
as shown in Figure 5.149.
Figure 5.149 Import slice parameters
The 3D printing effect depends on the slice parameters. This topic provides a
configuration sample, you can import it directly for printing.
The path of the configuration sample is Installation directory\DobotStudio
\attachment\, as shown in Figure 5.150.